I just found about about csf so I uninstall afp, bfd and install csf. spend time setting it up but still not getting lik what i want can some one post their csf so i can take a look.
I want to received e-mail at least for the following:
1. someone login ssh
2. someone using su (fail and pass)
3. someone try to brutal force (notify like bfd)
4. possible break in attemp like bfd
5. when ip got ban from brutal force
6. .... and all that good stuff that keep u alert.
it's possible to notify when someone try to login whm and cpanel?
I have almost everything setup for my VPS except for the firewall.
Someone told me that you can screw up your VPS if you configure your firewall incorrectly.
Can someone please guide me through? Which firewall should I use? and what all configurations should I make?
My VPS is on Debian 4 and I already have webmin configured on it. It does shows me an option to install a firewall but I just dont have enough courage to do so.
I need your opinion on the best drive configuration for my Dell poweredge 2850 dual 3.0.
I have 6 x 72gb scsi 10k hds, and perc4 raid in server. My os will be Cent os with 4 gigs of ram installed. I want to try to make this server as redundant as possible.
Offsite backup is also in plans. I’m going to use this server for a few sites (5 - 10) that are db driven, and host small video clips as Dolphin Smart Community. Server will be colocated. Please let me know if missed something .
i have node 16 cpu AMD 64 gb ram HDD sas 15 with raid 10 /hypervm + openvz i host 10 vps my problem when any vps load go over 2 the Node load go to 30 - 40 some time 100 i set CPU UNITS , Number Of CPUS and Cpu Usage for every vps but the load in node is go up
how i can set limit in vps and prevent from effect on load Node?
I just bought a subscription to dnsmadeeasy and changed my nameservers already. Now I did a dns report check and found the following: Reverse MX A records (PTR)ERROR: No reverse DNS (PTR) entries. The problem MX records are:
68.x.x.x.in-addr.arpa -> no reverse (PTR) detected You should contact your ISP and ask him to add a PTR record for your ips Can anyone tell me how to fix this with the dnsmadeeasy interface? I tried adding a PTR record, typed the IP but it always adds my domain name at the end.
Additionally, the IP it says 68.x.x.x is completely different from my server.. which is 69.x.x.x -- how is that ? The SOA record isrimary nameserver: ns0.dnsmadeeasy.com Hostmaster E-mail address: dns.dnsmadeeasy.com Serial #: 2008010106 Refresh: 43200 Retry: 3600 Expire: 1209600 2 weeksDefault TTL: 180
Is this default TTL too little? I checked some other domains and it was always more. MX Records:
I have a dedicated server with hostname named after my primary domain and mail on mail.example.com
But now when I add other domains via dnsmadeeasy, the mx only allows mail.thisdomain.com instead of mail.example.com
Is this normal? Do I just need to enter the main IP of my server and that's it? The name itself does not matter?
we installed CMS for our website, when a client want to signup to our website, the confirmation email send to theie Spam Box, we want to our email send to theire Inbox. how can i resolve this problem?
I've recently been trying to get my domain name volmasoft.com onto my new vps.
What i've done so far: * setup a host for ns1.volmasoft.com to go to 69.162.73.83 * setup a host for ns2.volmasoft.com to go to 69.162.73.84 * Set volmasoft.com to use ns1.volmasoft.com and ns2.volmasoft.com.
After 3 days it's finally gone off the godaddy page and proporgated (or so I thought)
I now get an "address not found" I can't trace the domain, nor ping it as it can't resolve the domain. However the whois does show that it's set to the ns1 and ns2 nameservers and IP of 69.162.73.83.
I recently moved to a VPS and installed Postfix onto it as my mail server. But I have following problems with its consistent working:
1. I experience that every now and then (once in 2 weeks) , it stops sending mails and put them in the mail queue with the following error:
Host or domain name not found. Name service error for name= type=MX: mysite.com not found, try again
I am not sure why it says so. However if I try to restart my mail server /etc/init.d/postfix restart and then try to flush the mails out of queue they are sent successfully. I am not sure where the problem is.
2. Secondly, I see that the header of my mails contains the hostname of my VPS machine "gospel" which is ofcourse not intended. How can I have my domain name in the mail headers?
and it seems to be normal again. Right now there is 2000 visitors going to the website and possibly 3000/hour during peek hours. The page is in php/mysql, 4 mysql queries per page.
When I goto CPU/MEMORY/MYSQL usage in WHM, there is a red color bar and the information is UserDomain%CPU%MEMMySQL Processes nobody39.11139.640.0
After increasing to 4 Giga memory ram is still a problem exists I could see there is heavy cpu and mysql usage from the Vbulletin forum of the domain " kuwaitup.com". The mysql configuration had been tweaked in the server and also max allowed connection had been increased to 600 from 500. and i think It is need to optimize the database " q8upcom_vb" so how we can make it ? and in my server only one site
dedicated SERVER Intel(R) Xeon(TM) CPU 3.06GHz 4CPUS 4000mb ram 100GB type/configuration: Unknown linux CENTOS Enterprise 4.4 i686 apache/IIS version: apache 1.3.37 (Unix) PHP version: php 4.4.4 MySQL version: mysql 4.1.22-standard
I was wondering how cban can be set up to track the bandwidth of a users who use different directories. I have a linux server running apache.
I read everything I can get my hands on about it and I'm still a bit confused.
I'm thinking that it might be a an htaccess command that defines the user's directory using the <CBandUser user_name> command.
It looks like the cban site and forum are down but I did find some info off their site using archive.org
I have a membership site and each member has their own directory and I'd like track the usage of each directory. It's my understanding that is is possible using Cband just not sure how it works exactly.
I want to buy soon a Dell PowerEdge SC1435, as my first 1U server.
I will hook it to a co-location data center, near by my place.
Feel free to tell me if you see some bad choice related to server options:
Dual Core AMD Opteron 2212HE 2.0GHz, 2x1MB Cache, 1Ghz HyperTransport No Operating System No Memory (if possible, plan to buy recognized performance brand) 24X IDE CD-ROM SAS 5IR internal RAID adapter, PCI-Express Add-in SAS5iR RAID Controller which supports 2 SAS Hard Drives - RAID 1 No Hard Drives (I already purchased 2 Fujitsu 73GB 15K SCSI ULTRA320 80pin HD's - Part MAU3073NC) On-Board Dual Gigabit Network Adapter, No TOE Rack Chassis with Static Rapid Rails, 1U Riser with 1 PCIe Slot Broadcom DualPort TCP/IP Offload Engine Not Enabled, Linux OS Only Bezel
I have the 2 Fujitsu 73GB HD's and plan to set them into a RAID 1 array. Will the RAID controllers from Dell be compatible with the above HD's? Do you recommend me NOT to get the Dell controllers and purchase instead a different brand?
I have a website with 30 000 daily visitors, suddenly it down to 8 000, then i changed of hosting provider, but i have the same problem, i know that my real visitors are more than 8000.
I can't correct configure the open_basedir. Safe_mode on server is enabled. Now path to accounts is: /var/www/webx/ . I would like change this path to /webx/ On server are some accounts. How can I do it?
What I did:
-> I set path in php.ini file (/etc/php4/apache2) in open_basedir = line to: /webx/ and /var/www/webx/ too. Without effect.
-> I added <Directory /webx/> php_admin_value open_basedir /webx/ </Directory>
in /etc/apache2/apach2.conf and /etc/apache2/confixx_mhost.conf
Without effect.
After any change I was restarting the apache service through /etc/init.d/apache2 restart, of course.
I have customer which site domain*.net (e) is hosted on my server.
domain*.com is his site too, (but is hosted by another hoster) and as *.com is operational site, he ask me to set for domain*.net records of domain*.com
so just now records for domain*.net are:
Code:
domain*.net - 14400 in A - IP of second hoster localhost.domain*.net -1440 in A -127.0.0.1 domain*.net 14400 ub MX - 0 www -14400 in CNAME - domain*.com FTP -14400 in A - IP of second hoster everything works nice, untill my client need to setup emails on this domain - domain*.net
i setup emails via cpanel, but if client try to connect via mail program (f.e. outlook express), he got an error. [as mail program try to connect to domain*.net which is pointed to domain*.com]
so my question is, is there any way, to change (add) any record, and as result have working emails on domain*.net ?
As i know, i must setup A or CNAME records of "mail" to my ip of domain*.net
# MySQL: 4.1.20 # Version protocoll: 10 # Server: Localhost via UNIX socket
This is my problem, the MaxConnection parameter by default is setup to 100 max user connections i want to adjust the limit to a resonable value because if the users go over the limit the MySQL crash and i must restart the server because the entire system don't work.... (probably this is a bug of MySQL 4.1.2 ) but i don't know because i'm not an expert user....
I spoke with Godaddy Sys Admin and they said: "...you must modify the my.cnf file and add:
Code: [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 set-variable = max_connections = (the number that you want)
[mysql.server] user=mysql basedir=/var/lib
[mysqld_safe] err-log=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid Ok i have modified this by adding 1000, but with this new variable the MySQL don't start.....
