Does anyone know of a webmin module that works with dyndns.org and updates the ip automatically?
I've tried the dyndns 0.4 module for webmin but I get errors when trying to add a hostname.
Quote:
Unsupported file or mode >./config.txt at main::../web-lib-funcs.pl line 2994
Hi, i was wondering how i would be able to use a subdomain to "dyndns". By dyndns i mean how some people use no-ip.org or dyndns.org to hide their IP address. It doesnt only hide and "mask" but it's basically like being on a normal website, where the website actually changes for each page you go to. For example pretend i was using no-ip.org.
Pretend i dont have a domain and i host a website through my VPS
Instead of 123.456.78.9, i used no-ip.or and it was now website.no-ip.org. But it not only masks, if someone goes to index.php. It would be website.no-ip.org/index.php and if someone went to chat.php, their address bar would say website.no-ip.org/chat.php.
But is it possible to do this with a subdomain?
I recently got a new hosting plan, and I'm wondering what the best way to redirect a Dyndns.org domain is. I'm currently hosting a small site on my old server, which I have httpd.conf access to, using a Dyndns.org address. I'd like to have the Dyndns.org point to my new server at DTH, but it seems that the Dyndns.org system isn't compatible with a shared hosting environment. So, my question is, what's the most seamless way I could make a Dyndns.org address point to a folder or subdomain on a shared hosting account? I considered pointing the Dyndns.org domain directly to the IP, but that wouldn't redirect to the specific folder that the site would be in.
I'd really like to keep the dyndns.org address the same in search engines if possible.
If I issue a 301 "Permanent Move" code, will the search engines update with the new address. If this is too hard, maybe it would be better if I let go of the old address and just setup a redirect to retain my traffic.
Webmin ...
View 2 Replies View RelatedI've just bought a VPS with [url], and they only offer cPanel (of which costs extra money per month). so I decided to install Webmin, which I have never used before.
how I set up my DNS servers in Webmin? I'm completely lost here.
with webmin can I use it to add FTP users to say pure ftpd? and does it work with lighttpd? If I'm thinking about it right webmin just allows us to control the service and modify the configuration files right?
View 1 Replies View Relatedwe have problem with webmin and iptables
we must STOP iptables service to work webmin !
also when iptables running seems apache goes down we must STOP iptable service to work apache.
I want to use whmcs with webmin as its a free utility. though i am not getting how to setup a cron job and email piping on the same. I have tried using php -q /var/www/pipe/pipe.php in my scheduled cron jobs in webmin. But it everytime results in an error. Also i have tried using /usr/local/bin/php -q /var/www/whmcs/pipe/pipe.php . But still shows error.
View 2 Replies View RelatedI started using some dedicated server and I have Webmin as control panel. There is also Apache that I turned on and it worked.
But since I didn't find anything to access server via ftp, I searched on net and understood that I need to install some module for it on Webmin.
In list of inactive modules I found Proftpd and install it. And then I made problem: somewhere in Webmin where is administration of users I edited user "ftp" since when logging I went to directory /var/ftp and I wanted to go to /var/www/html.
But when I changed accessing directory from /var/ftp to /var/www/html it didn't work so I again moved to /var/ftp. After that I again couldn't access but noticed in file manager under Webmin that content of /var/www was moved to /var/ftp and previous content of /var/ftp disappeared. I created new directory www in /var and copied in file manager content from /var/ftp but again when access from public address I receive error 403 forbidden. I rebooted system but again same.
Webmin
View 4 Replies View RelatedI recently purchased a VPS and was wondering which control panel I should ask my provider to install. Both are free, but I was wondering which one you guys preferred?
Also, which one uses less system resources (like RAM, etc)?
i ordered a server today from serverbeach,
I have changed my nameservers at the domain registrar but when using the serverbeach DNS tool to use the serverbeach DNS service , its asks me for the IP of my domainname.
How do I find in webmin the IP address of the domain to be entered
I'm planning to operate my own dedicated server and bad news is I'm not much of a technical person. A friend recommends that I can use free Webmin as a front end (control panel) rather than paying for others. Do you think Webmin is suitable for newbie on this front?
View 6 Replies View Relatedmy VPS with Steadcom has been running for about six months now and for the most part I'm very pleased.
I'm not all that skilled at running it yet, still learning.
First, My email was being blocked by some recipients, I am using sendmail. So I had to change the hostname and the hosts file, and the network file to my domain name, instead of the hostname Steadcom gave me. This fixed the email and it seems receipients are okay with the new settings.
However, whenever I restart the VPS, these files and the hostname get reset. How can I make it so these are not changed... is this something I have to bring up with Steadcom or is it a setting I'm not getting quite right?
Second... my webmin seems to have problems. I can log in, but then sometimes I cannot navigate to the areas I need to, as I'll get a page not found error. I have been stopping and restarting webmin, and that sometimes helps, but sometimes not and I have to restart the whole server. Which I really don't want to do just for webmin. I don't really know webmin that well, either, so would love some help on what I can do about this.
Third.. when I have SSH running I often get Brute Force warnings for a bot or someone trying to log in. So I just stop the service all together. But when I restart, it starts up again. How can I keep SSH from starting unless I need it?
if its possible to use usermin and webmin for simple vps hosting ? Or can anyone recommend free or cheap panel for my linux vps.
View 10 Replies View Relatedi had cpanel but its lic is over.. now i want to install webmin, so can i do that..
i fear that if i remove cpanel then all my accounts and data will be lost..
I have apache2 and I have minimal webmin 1.330 installed at /webmin/
Following this tutorial: [url]
I have done the commands it asks and I have added this to my sites-available:
Quote:
<VirtualHost _default_>
ServerName panel2.ipalaces.org
ServerAdmin admin@ipalaces.org
DocumentRoot /webmin/
DirectoryIndex index.cgi index.html
<Directory /webmin/>
Options ExecCGI
AuthName Webmin
AuthType basic
AuthUserFile /etc/webmin/htusers
require valid-user
</Directory>
</VirtualHost>
and added this to apache2.conf:
Quote:
SetEnv WEBMIN_CONFIG /etc/webmin
SetEnv WEBMIN_VAR /var/webmin
SetEnv SERVER_ROOT /webmin
SetEnv MINISERV_CONFIG /etc/webmin/miniserv.conf
Am i doing this right? I want to be able to access webmin from the URL panel2.ipalaces.org.
I did
Quote:
htpasswd -c /etc/webmin/htusers brian
and then set a password as "test" for brian. However it won't login.
I am trying to set up the FTP on my VPS. I am using webmin control pannel and os CentOs 4.
I have created a user called mic and made the home dir of the user /var/www/. then placed the user in the group ftpusers.
I then went into the proFTPD server config but of webadmin and set the user and group. i then tryed to log in to the FTP. SUCSESS.
BUT .... wen i tryed to upload somethink it give me permission denied. and when i try to delete somethink Access denied.
What did i do wrong?
every now and again Webmin seems to become inaccessible eg. when I go to [url]it just sits there and eventually times out with a "The connection has timed out" error.
But if I use lynx from the server to access [url]it works fine, does any one have any ideas what could be causing this, if I restart the server it then starts working fine again.
im running my own BIND and also have Webmin installed.
whats the best way to forward one domain to another?
domain.biz forwards to domain.com
I have just installed my vps with webmin on debian 5 and I need a guide to how to configure my system to use suphp, Ive googled it but not come back with any clear guide.
I better add Ive plunged in at the deepend and after the secuity breach at Vaserv, I can not take the easy option and install lxadmin any longer.
How do you import a database using webmin?
View 8 Replies View RelatedWhere do I enable mod rewrite in webmin? my wordpress permalinks doesn't seem to work with pretty links
View 5 Replies View RelatedWhich is better for servers plesk or webmin?
View 14 Replies View RelatedCan anyone share some experiences on this? I'm new to VPS so it's not clear how much RAM cPanel will consume comparing with Webmin after everything is configured for production?
View 10 Replies View RelatedI've been trying to set up my own name servers in my Webmin, however, I am frustrated now, as it never seems to work for me. The tutorials available are kind of outdated.
View 7 Replies View RelatedI get the following message when installing MySQL in Webmin and in ssh, also with a few other packages. What do I do?Setting up Install ProcessSetting up repositoriesnot using ftp, http[s], or file for repos, skipping - Null is not a valid release or hasnt been released yet.. install failed!
View 12 Replies View RelatedIs webmin easy to use compared to Cpanel/WHM ? I'm currently using a managed server.
View 0 Replies View RelatedI have been using webmin's bandwidth monitoring function for a while but (as anyone who's ever used it) i have a few issues:
3 huge (~250MB and growing) log files: /var/log/bandwidth, kern.log and syslog.
also the 'dmesg' only outputs these log messages:
BANDWIDTH_IN:IN=eth0 OUT= MAC=00:16:3e:00:00:c6:00:0c:db:0d:e2:4c:08:00 SRC=89.181.46.133 DST=83.246.72.186 LEN=92 TOS=0x00 PREC=0x00 TTL=116 ID=36035 DF PROTO=TCP SPT=4399 DPT=22 WINDOW=64711 RES=0x00 ACK PSH URGP=0
BANDWIDTH_OUT:IN= OUT=eth0 SRC=83.246.72.186 DST=89.181.46.133 LEN=92 TOS=0x10 PREC=0x00 TTL=64 ID=42455 DF PROTO=TCP SPT=22 DPT=4399 WINDOW=10720 RES=0x00 ACK PSH URGP=0
I installed syslog-ng in hopes that i could change this behaviour but to no avail. the real problem i see is that shorewall/iptables only logs to "kern" facility...
has anyone found a way arround this? maybe even using some other firewall?
How to configure bind using WEBMIN as slave zone with [url]as master?
View 1 Replies View RelatedI forgot the Password for the MySQL Database Server , How to recover it or change it without Known the old one ..
i have access to the SSH and webmin..
