Script To Check The Server Load And To Send Email If It Is Pretty High

Dec 16, 2007

Anybody got a good script to check the server load and to send email if it is pretty high? Perl or bash one?

View 4 Replies


ADVERTISEMENT

High Server Load - How To Check From Logs

Jul 14, 2007

my server load was above 200+ today on this specific time.

How do I check from logs what is going on? Where do I begin?

16:28:11 up 32 days, 22 min, 2 users, load average: 241.03, 108.69, 54.24
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
mi pts/0 xxx.82.73.xxx Thu20 0.00s 0.06s 0.39s sshd: mi [priv]
mi pts/1 xxx.82.73.xxx Thu21 18.00s 1:07m 0.37s sshd: mi [priv]

View 9 Replies View Related

Script To Email Me When High Load

Jun 30, 2007

does anyone have a script that they made or know of that monitors the VPS load and when it hits higher than a certain number it sends me an email?

View 14 Replies View Related

High Server Load / High Swap / Lots Of Httpd

Feb 20, 2008

I have a cPanel server with 4GB RAM

My server hangs time to time, once or twice a day. This is the last status when it happens.

Server Load 75.90 (2 cpus)
Memory Used 92 %
Swap Used 65.78 %

When I was still inside SSH when it happens, the processes I can see inside "top" are a lot of httpd processes.

So I "killall -9 httpd", I had to do it 30~40 times

#killall -9 httpd
#killall -9 httpd
#killall -9 httpd
x 30~40 times until no pid process found & the server load is back to normal.

Before that, I check httpd fullstatus, they look very normal, same goes to what I see inside WHM Apache status & cpu usage status.

At first I thought it was a memory problem after consulting with a server admin, so I replaced all 4GB new ram stick (such a waste)

View 12 Replies View Related

My Server Is Very Slow, High CPU, High Apache Load

Oct 31, 2009

My server is very slow, High CPU, High Apache load....

I got a new server and i had setup a script on it.

No server tweaks has been done.

I run a filehosting site so it gets very slow when traffic is high.

Here is some info:

Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4135 filedip 19 0 12812 8892 2212 R 18.9 0.4 0:00.74 index.cgi
3140 apache 15 0 22624 9604 2768 S 17.3 0.5 1:54.45 httpd
3556 apache 15 0 22792 9592 2768 S 17.3 0.5 0:43.53 httpd
3739 apache 15 0 22672 9556 2744 S 17.3 0.5 1:09.67 httpd
3884 apache 15 0 22664 9560 2744 S 17.3 0.5 0:23.98 httpd
3474 apache 15 0 22672 9572 2756 R 16.1 0.5 1:34.09 httpd
3548 apache 15 0 22792 9560 2740 S 16.1 0.5 1:33.67 httpd
3991 apache 15 0 22640 9588 2756 S 15.1 0.5 0:22.44 httpd
3475 apache 15 0 22672 9580 2756 S 13.2 0.5 1:31.42 httpd
3493 apache 15 0 22664 9592 2768 S 12.9 0.5 1:15.52 httpd
3769 apache 15 0 22664 9580 2756 S 12.9 0.5 0:45.19 httpd
3638 apache 15 0 22664 9576 2756 S 12.3 0.5 0:32.82 httpd
3724 apache 16 0 22664 9580 2756 R 12.3 0.5 0:34.25 httpd
3626 apache 15 0 22672 9580 2756 S 11.7 0.5 0:52.54 httpd
4023 apache 16 0 22792 9560 2740 R 11.3 0.5 0:13.16 httpd
3882 apache 15 0 22664 9576 2756 S 10.1 0.5 0:38.56 httpd
3005 apache 15 0 22672 9588 2768 R 9.1 0.5 2:06.61 httpd

I dont know much about server managment...

how to fix this so server doesnt go slow?

View 6 Replies View Related

Server High Load/high Mysql Usage

Jul 2, 2009

I have a site that is eating up my server resources and need to know what the best solution for this is. I'm thinking of getting another server just for mysql but do not know what specs the server should be to handle the current traffic/database load and have the site run smoothly without slowing down to a snail's pace.

An alternative is to get another server just for the videos being served and leave the database and html on the current server. This is where I'm stuck and don't know what route to take with this.

My current server stats:

Dual Xeon 5130
4GB RAM
250GB
50 Mbit/sec
CentOS 3.9

Website traffic stats:

15,000 visitors/day
150,000 pageviews/day
Serving videos

I've attached screenshots of top and bandwidth usage per day. Hopefully with this information you could tell me if I need another server or if there are any things I can do to the current server to help things move faster.

View 13 Replies View Related

How To Check Load Via Ssh And Check Files Causing Load

Jul 1, 2009

I would like to know how to check load via ssh and check files causing load?

I want the ssh codes for 2 different set of control panels, one with cpanel+whm and other with kloxo+hypervm

and I would also know how to check the files causing the load, such as some files could have been interrupted while processing, so they could be causing load some times, so I want to stop such processes if any are running on the vps on my friends accounts

View 5 Replies View Related

How To Check Which Mysql Databases Cause Server Load

Jul 30, 2007

How can i check (using SSH) which databases/users cause server load to mysql ?

I've tried "mysqladmin proc stat" but it shows just the current. How can i get stats of the last 24 hours for example ?

I've also seen slow connections stats. What is the command to check more detailed report of the slow connections; which databases caused it etc', in the last 24 hours for example as well.

View 4 Replies View Related

Send Mail And Server Load

Jun 13, 2008

When user send group mail, server load going high and server down?

How can resolve this issue? because i have many customer used vbulliten forums and need to send group mail.

I use cpanel on this server.

27668 ooo29 0
11.0
0.0 [php] <defunct>
26611 root 0
7.0
0.8 /usr/local/cpanel/whostmgr/bin/whostmgr2 ./top
23957 root 0
4.7
7.7 /usr/sbin/exim -Mc 1K7Ao8-0006D9-Me
26175 mailnull 0
4.7
2.2 /usr/sbin/exim -bd -q60m
24024 root 0
4.3
6.7 /usr/sbin/exim -Mc 1K7AoK-0006ER-Mx
26383 root 0
4.3
1.1 /usr/sbin/exim -Mc 1K7AqX-0006qd-0R
24191 root 0
4.1
5.6 /usr/sbin/exim -Mc 1K7Aok-0006Hd-Ra
26233 root 0
4.1
2.1 /usr/sbin/exim -Mc 1K7AqC-0006o7-2n
24030 root 0
4.1
6.2 /usr/sbin/exim -Mc 1K7AoT-0006FV-Dl
24100 root 0
4.0
5.9 /usr/sbin/exim -Mc 1K7AoW-0006G4-VN
26463 root 0
4.0
0.7 /usr/sbin/exim -Mc 1K7Aqe-0006rY-6r
24156 root 0
3.9
5.5 /usr/sbin/exim -Mc 1K7Aod-0006Gr-U3
26326 root 0
3.8
1.3 /usr/sbin/exim -Mc 1K7AqJ-0006p8-V1
24550 root 0
3.7
3.6 /usr/sbin/exim -Mc 1K7ApO-0006NG-RB
25930 root 0
3.7
3.0 /usr/sbin/exim -Mc 1K7Apq-0006kB-R4
25926 root 0
3.6
2.9 /usr/sbin/exim -Mc 1K7Apq-0006k9-KR
26124 root 0
3.6
2.2 /usr/sbin/exim -Mc 1K7Apr-0006kf-SZ
24433 root 0
3.6
3.9 /usr/sbin/exim -Mc 1K7ApH-0006Lv-Bt
26547 root 0
3.5
0.3 /usr/sbin/exim -Mc 1K7Aqm-0006sq-DJ
25953 root 0
3.4
2.6 /usr/sbin/exim -Mc 1K7Apr-0006kU-Mv
25752 root 0
3.4
3.0 /usr/sbin/exim -Mc 1K7Apd-0006g2-RD
24422 root 0
3.3
3.7 /usr/sbin/exim -Mc 1K7ApB-0006LN-28
27649 root 0
3.0
0.1 /usr/sbin/exim -Mc 1K7Aqu-0006uC-V5

View 4 Replies View Related

High Server Load ...?

May 7, 2009

do you know what my server having very strange problem my server load suddenly increas after every 2 or 3 days some time after 1 days but when we talk about those days in which server load is fine then that time server load very low almost 0.4 to 0.1 .

But on that high load day server load reached upto 500.

when i try to find out what wrong then i only get that there is too much connection of http when i kill httpd through this killall -KILL httpd then server load suddenly decrease and then stable.

View 12 Replies View Related

Server Load Too High (VPS)

May 27, 2007

I have a couple of sites that are generating errors because the server load is too high and when I check service status I am seeing the following: Server Load 21.49 (8 cpus)

How can I tell if the problem is one of my sites in my VPS or a different site on a different VPS on the same server?

View 14 Replies View Related

Server Load High

May 9, 2007

server load is too high, can you suggest why too many process of qmail-smtpd even i stopped qmail and there is no more 25 emails in queue.

top - 22:26:03 up 8 days, 5:56, 0 users, load average: 150.96, 150.27, 142.68
Tasks: 183 total, 150 running, 33 sleeping, 0 stopped, 0 zombie
Cpu(s): 99.0% us, 1.0% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 4167500k total, 146416k used, 4021084k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
20168 qmaild 25 0 3468 1432 1168 R 3.3 0.0 2:55.27 qmail-smtpd
20208 qmaild 25 0 3468 1432 1168 R 3.3 0.0 2:43.98 qmail-smtpd
20320 qmaild 25 0 3468 1432 1168 R 3.3 0.0 2:38.56 qmail-smtpd
20425 qmaild 25 0 3468 1432 1168 R 3.3 0.0 2:31.09 qmail-smtpd
20444 qmaild 25 0 3468 1432 1168 R 3.3 0.0 2:27.97 qmail-smtpd
5413 qmaild 25 0 3468 1432 1168 R 3.3 0.0 1:00.38 qmail-smtpd
5705 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:57.91 qmail-smtpd
5763 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:57.40 qmail-smtpd
5806 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:56.99 qmail-smtpd
5999 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:55.98 qmail-smtpd
7318 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:53.39 qmail-smtpd
7639 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:51.43 qmail-smtpd
7866 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:50.29 qmail-smtpd
7980 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:49.59 qmail-smtpd
8023 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:49.29 qmail-smtpd
8101 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:48.48 qmail-smtpd
9253 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:47.40 qmail-smtpd
9355 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:46.78 qmail-smtpd
9386 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:46.48 qmail-smtpd
9525 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:45.84 qmail-smtpd
9611 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:45.81 qmail-smtpd
9854 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:44.89 qmail-smtpd
9974 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:44.08 qmail-smtpd
11272 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:42.29 qmail-smtpd
11331 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:42.09 qmail-smtpd
11482 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:41.69 qmail-smtpd
11652 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:40.99 qmail-smtpd
12040 qmaild 25 0 3468 1432 1168 R 3.3 0.0 0:39.41 qmail-smtpd
3530 qmaild 25 0 3468 1432 1168 R 3.0 0.0 1:08.48 qmail-smtpd
12246 qmaild 25 0 3468 1432 1168 R 2.0 0.0 0:38.79 qmail-smtpd

View 4 Replies View Related

Server High Load

Apr 22, 2007

I know there are thousands of topics about this and yes i did use search function to try doing some changes myself and didnt wanna hijack someone else's topic so started my own

well my problem is i run a torrent site which puts a lot of load on my server. Just got upgraded to P4 2.8 ghz with 2GB ram , iam running fedora with WHM/Cpanel

i will do anything with server to put load down cos of load i have turned off my 4 other big sites ...

View 14 Replies View Related

Server Load High

Jun 9, 2008

there are lot of sessions /task running of httpd by user nobody.

Due to this my server load going very high.

I am use opreting system fadora and cpanel latest version.

View 9 Replies View Related

Server Load High But

Nov 23, 2007

the site is running fine..

i have increased my maxclients from 256 to 320 ( reset all same ) my load has increased from avg 3 to 8.. is it a prob?

View 5 Replies View Related

High Server Load

Mar 24, 2007

I've got a server that suddenly over the last three days has exploded as far as server load. Watching top I have some httpd processes that are using up all of the cpu and lasting for quite some time. How can I find out more about these hanging processes? I need to track this down as quickly as possible and find out what the cause is.

View 13 Replies View Related

High Server Load CLAMD

Apr 20, 2009

We have an abnormal server load because of clamd.

View 4 Replies View Related

Too High Server Load, How To Handle

May 4, 2008

if upgrading to that new server that I'll mention will probably solve my problems. Whatever help you can provide would be greatly appreciated. Below are the details:

In the GMT evenings and nights my current server gets so loaded that every page load takes 10 - 30 seconds. Even the pure html pages will be so slow to load. It seems that after a certain treshold it just suddenly becomes that much slower. Not much middleground there. I have high MaxClients and ServerLimit values now and the error log doesn't say that they are exceeded anymore but that didn't help enough.

I have a high traffic website that is using latest version of apache (2.2.x) with the prefork MPM and apache is optimized, PHP 5.2.5 and APC 3.0.15.

I get 160,000 - 210,000 pageloads per day. 32,000 - 45,000 visits per day.

Most of its pages are PHP but shouldn't be too CPU or databes intensive. Mysql isn't used and I mostly used sharedmem (php's shm functions) for databases. 2 semaphores are quite heavily used but that can't explain how a few more users would make the server serve pages so much slower.

Swap usage is practically 0 and CPU user % usage is like 1 - 2 % and CPU system % is also about the same even during peak times. However the Average Load or whatever that "top" reports is 6 - 9.

My current server scecs: 1 GB Ram, Pentium D 3 ghz, CentOS 5 32bit fully updated.

I load all pictures and even the stylesheet from a secondary server by using href="$secondaryserverIP..." in the html code, so the main server practically just serves the pages.

My new server will have apache with the worker MPM and latest versions of every software. Also its specs are: 2 GB of RAM, Intel Dual Core Xeon 2.40GHz, CentOS 5.1 32bit fully updated.

I have a sophisticated netstat based ddos script that is an improved version of DDoS Deflate and while some of these slowdowns seem to have been caused by attacks that it then was able to defend me from, most of them are not. I am even protected from users who constantly have 7+ connections to my site and if someone has a way too high number of connections, the script won't even check if it constantly has it and the script just bans that user outright. It probably is banning a bunch of innocent proxy users too but that is a small price to pay.

View 14 Replies View Related

High Server Load + Chat Box

Jun 18, 2008

Alright we just bought a new customer aboard with a ChatBox on the site it seems as if this chatbox is causing higher load we went from 0.00 to 0.68-1.12 now this happened on our old server before too with another chatbox. They use vBulletin any ideas as to what would be causing this?

View 5 Replies View Related

How To Lower High Server Load

Feb 13, 2008

When i check the server status is shows a high server load.

How do I lower the server load? it looks like for mysql activity.

View 14 Replies View Related

MySQL High Server Load

Dec 18, 2008

MySQL the last few days seems to be constantly the most demanding process in top, which it never was before. As far as I can tell, nothing has substantially changed with regards to traffic to MySQL driven sites on the server. Is there anything that might be wrong with the databases, etc., that might throw MySQL into a tizzy?

View 8 Replies View Related

May Switch Cause High Load On Powerful Server

Jul 28, 2009

I have two quad core processors and load is like 15.

May it be caused by switch if it doesnt let traffic trough properly?

if dmesg grep eth shows 100 full duplex is it normal or should it be 1000 full duplex?

how can I make it 1000 full duplex on centos 5?

Quote:

0000:0a:02.0: eth0: (PCI Express:2.5GB/s:Width x4)
0000:0a:02.0: eth0: Intel(R) PRO/1000 Network Connection
0000:0a:02.0: eth0: MAC: 3, PHY: 5, PBA No: ffffff-0ff
0000:0a:02.0: eth1: (PCI Express:2.5GB/s:Width x4)
0000:0a:02.0: eth1: Intel(R) PRO/1000 Network Connection
0000:0a:02.0: eth1: MAC: 3, PHY: 5, PBA No: ffffff-0ff
ADDRCONF(NETDEV_UP): eth0: link is not ready
0000:0a:02.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
0000:0a:02.0: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
0000:0a:02.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
0000:0a:02.0: eth1: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:0a:02.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present

View 7 Replies View Related

High Server Load And Slow Performance

Mar 11, 2009

I am currently hosting my website on one server with the specs:

2.8ghz Dual Quad-Core processor + 8 gigs of ram + two 500 hard drives with a 50 mbps unmetered bandwidth package.

My current problem lies in high server loads and very slow server performance throughout the day.

I am considering migrating over to The Planet onto server with the specs:

3.0ghz Dual Quad-Core + 18 gigs of ram + two 50gb hard drives with 2TB of monthly bandwidth transfer.

In an attempt to have great bandwidth pricing and server performance, I plan on downgrading my current server with my current host to a lowe-end server and keeping it only to host my VIDEO and MUSIC files with the 50mbps unmetered package. The Planet will then host my database and all other web related files on their new server.

Is this a good idea as an attempt to save money in bandwidth costs and eliminating my server lag issues?

I was offered a setup of a separate web and database server at my current host but from what I have read, no one touches the performance and reliability The Planet has to offer.

View 6 Replies View Related

May Server Crash Due To High Load With Low CPU And RAM Usage

Oct 29, 2009

I have server load like 40.

Nothing lags.

Server has RAM usage 20% and CPU usage goes up to 25%

Swap isnt used at all.

Should I be afraid of server crash incase server load goes up to 60 or 80 without ram and cpu usage rising that much?

View 9 Replies View Related

High Server Load ... With Mysql Optimization

Apr 21, 2008

So the site got featured on [url]and now the server is drowning...

The Coppermine Gallery usually hovers around 30~50 users daily and now, 1800, and im at a lost as how I should configure mysql to take on such a load. right now it takes about 10 secs or more to load a page and sometimes it would time out. Because it si coppermine, all pages are dynamic and can't be cached -_-"

Here's the my.cnf right now after i played around with the numbers

server spec
Opteron 170 (2ghz)
2gb ram
250 7200rpm

[mysqld]
set-variable=local-infile=0
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
#skip-networking
back_log = 75
key_buffer = 256M
myisam_sort_buffer_size = 64M
join_buffer_size = 1M
read_buffer_size = 1M
sort_buffer_size = 2M
table_cache = 1800
thread_cache_size = 384
wait_timeout = 7200
max_connections = 600
connect_timeout = 100
wait_timeout = 12000
tmp_table_size = 100M
max_heap_table_size = 64M
max_allowed_packet = 15M
max_connect_errors = 9999999
read_rnd_buffer_size = 524288
bulk_insert_buffer_size = 8M
query_cache_limit = 40M
query_cache_size = 150M
query_cache_type = 1
query_prealloc_size = 65536
tmp_table_size = 64M
query_alloc_block_size = 131072
default-storage-engine = MyISAM

[mysql.server]
user=mysql
basedir=/var/lib

[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
nice = -5
open_files_limit = 8192

[mysqldump]
quick
max_allowed_packet = 16M

[myisamchk]
key_buffer = 64M
sort_buffer = 64M
read_buffer = 16M
write_buffer = 16M
httpd.conf

Timeout 20

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# ServerLimit: maximum value for MaxClients for the lifetime of the server
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 200
MaxClients 200
MaxRequestsPerChild 1500
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

View 11 Replies View Related

High Server Load - Httpd Processes

Mar 23, 2008

a topic long time ago that my server load is frequently high.

I'm talking about something like this
Server Load 158.86
Memory Used 28.2 %
Swap Used 99.57 %

[url]

The only way to solve this problem is to identify the load earlier and kill all httpd process. What I did was

#killall -9 httpd
#killall -9 httpd
#killall -9 httpd
x 30~40 times until no pid process found & the server load is back to normal.

On previous thread, I tried to update mysql & php and it works,

Right now again I am experiencing high server load again...

I'm very sure it's caused by httpd but I am still unable to find out the real cause of the problem and which account user is the culprit for causing this high load.

Can someone assist me by telling me where/how to begin with?

View 4 Replies View Related

Incoming Spam & High Server Load

Dec 17, 2007

I'm having problems with incoming spam on my dedicated server the load average of the server is around 80 or 100.2 I know it's incoming spam because when I check the exim process I see a lot of ips from russia, germany, taiwan then I block that ips with the /etc/apf/apf -d ip command and then the load of the server drops down to 7 or less, so the cuestion is how can I detect and block the spammers ips automatically on the server? I have spam assassin running and blocks the spam emails right, the real problem is the high load generated for spamd application and all the incoming connections of the spammers ips on the server.

Server specifications:

Cent OS 4
Control panel: directadmin
Dual-Core AMD Opteron(tm) Processor 2214 HE
1GB RAM
Exim 4.68
Apache 1.3.39
MySQL 5.0.37
vm-Pop3d 1.1.7f-DA-2

View 8 Replies View Related

Which Command To See What Is Causing High Server Load.

May 18, 2007

Which command do we type to see what is causing a high server load?

I've restarted the VPS numerous of times, and I wish to found out the problem

View 7 Replies View Related

High Load On Apache/PHP Server - What Can I Twiddle

Sep 2, 2007

I deal with a server that gets positivey slammed once a week for a few months per year. I'd tell you how many hits we got tonight, but I'm still waiting for AWSTATS to chew through the 2gb access_log file...

Tonight, I made some changes that SEEM to work, but I"mn not sure what the long-term effects could be. If we have any apache experts on the forums, I'd really like to bend your ear for a few to see what you know.

Obviously, with PHP, we're limited to prefork MPM.

First of all, I dropped Timeout from 300 to 120. That should be MORE than enough time to know that we've timed out. Then I dropped KeepAliveTimeout to 5 from 15.

Here's the radical one. Watching the process list and the load, it seemed that load spiked when the processes hit their end of useful life and respawned. Duh. This was happening every four seconds at the load we were under. MaxRequestsPerChild was set to 10,000. I upped this to 80,000 over a period of hours that we were under the load. I didn't see any significant memory leakage, but it's the change I'm worried about the most. I've seen Apache do some bad things when people allow this to go unlimited, and had always used the relatively low default as a guide.

Besides not loading a bunch of dynamic modules (also done, I usually do this so I'm not worried about it), what else can I do tuning-wise to keep load down? Please note that caching and load-balancing aren't acceptable solutions; I have one server to work with (for now) and the boss says no to caching because of how frequently our information updates. We also have extensive .htaccess files, so there's no LHTTPD in my future.

View 2 Replies View Related

Server Using Cpanel Under Extreme High Load

Apr 3, 2007

my server is running cpanel, dual xeon 2.4GHZ, 2GB ram, only have about 10 small websites, but look at the load:

Quote:

Tasks: 154 total, 1 running, 153 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.1% us, 0.1% sy, 0.0% ni, 0.0% id, 99.8% wa, 0.0% hi, 0.0% si
Mem: 2074940k total, 1110308k used, 964632k free, 105768k buffers
Swap: 4096564k total, 0k used, 4096564k free, 829452k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
27230 root 16 0 2168 1000 760 R 0 0.0 0:02.15 top
1 root 16 0 2620 556 472 S 0 0.0 0:00.99 init
2 root RT 0 0 0 0 S 0 0.0 0:00.10 migration/0
3 root 34 19 0 0 0 S 0 0.0 0:00.00 ksoftirqd/0
4 root RT 0 0 0 0 S 0 0.0 0:00.07 migration/1
5 root 34 19 0 0 0 S 0 0.0 0:00.18 ksoftirqd/1
6 root RT 0 0 0 0 S 0 0.0 0:00.08 migration/2
7 root 34 19 0 0 0 S 0 0.0 0:00.15 ksoftirqd/2
8 root RT 0 0 0 0 S 0 0.0 0:00.21 migration/3
9 root 34 19 0 0 0 S 0 0.0 0:00.00 ksoftirqd/3
10 root 5 -10 0 0 0 S 0 0.0 0:00.00 events/0
11 root 5 -10 0 0 0 S 0 0.0 0:00.00 events/1
12 root 5 -10 0 0 0 S 0 0.0 0:00.00 events/2
13 root 5 -10 0 0 0 S 0 0.0 0:00.00 events/3
14 root 5 -10 0 0 0 S 0 0.0 0:00.01 khelper
15 root 15 -10 0 0 0 S 0 0.0 0:00.00 kacpid
43 root 5 -10 0 0 0 S 0 0.0 0:00.00 kblockd/0
44 root 5 -10 0 0 0 S 0 0.0 0:00.00 kblockd/1
45 root 5 -10 0 0 0 S 0 0.0 0:00.00 kblockd/2
46 root 5 -10 0 0 0 S 0 0.0 0:00.00 kblockd/3
47 root 15 0 0 0 0 S 0 0.0 0:00.00 khubd
56 root 15 0 0 0 0 D 0 0.0 0:01.24 pdflush
59 root 8 -10 0 0 0 S 0 0.0 0:00.00 aio/0
60 root 11 -10 0 0 0 S 0 0.0 0:00.00 aio/1
61 root 11 -10 0 0 0 S 0 0.0 0:00.00 aio/2
62 root 5 -10 0 0 0 S 0 0.0 0:00.00 aio/3
58 root 15 0 0 0 0 S 0 0.0 0:01.12 kswapd0
135 root 25 0 0 0 0 S 0 0.0 0:00.00 kseriod
212 root 15 0 0 0 0 S 0 0.0 0:00.00 scsi_eh_0
213 root 15 0 0 0 0 S 0 0.0 0:00.00 percraid
234 root 15 0 0 0 0 D 0 0.0 0:06.05 kjournald
1180 root 6 -10 2664 456 380 S 0 0.0 0:00.03 udevd
1346 root 5 -10 0 0 0 S 0 0.0 0:00.00 kauditd
1421 root 8 -10 0 0 0 S 0 0.0 0:00.00 kmirrord
1422 root 8 -10 0 0 0 S 0 0.0 0:00.00 kmir_mon
1442 root 19 0 0 0 0 S 0 0.0 0:00.00 kjournald
1443 root 15 0 0 0 0 D 0 0.0 0:01.93 kjournald
2168 root 15 0 3468 600 512 D 0 0.0 0:00.60 syslogd
2172 root 16 0 2428 484 420 S 0 0.0 0:00.25 klogd
2182 root 16 0 1756 492 412 S 0 0.0 0:00.01 irqbalance
2194 named 18 0 69712 3492 2232 S 0 0.2 0:01.11 named
2268 root 16 0 2644 440 380 S 0 0.0 0:00.00 courierlogger
2269 root 16 0 1940 612 508 S 0 0.0 0:00.00 authdaemond
2270 root 16 0 1940 616 512 S 0 0.0 0:00.00 authdaemond
2271 root 16 0 1940 616 512 S 0 0.0 0:00.00 authdaemond
2272 root 16 0 1940 616 512 S 0 0.0 0:00.00 authdaemond
2273 root 16 0 1940 616 512 S 0 0.0 0:00.00 authdaemond
2274 root 16 0 1940 616 512 S 0 0.0 0:00.00 authdaemond
2303 root 16 0 5392 1012 844 S 0 0.0 0:00.00 rpc.idmapd
2375 root 18 0 1980 552 480 S 0 0.0 0:00.00 acpid
2384 root 15 0 9308 2076 1632 S 0 0.1 0:00.03 cupsd

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved