Plesk 12.x / Linux :: Modify Firewall Rules Never Completes
Nov 9, 2014
Applying Plesk firewall changes? I make my change, apply and get to:
Status: Applying in progress. If your browser shows connection error messages, or if this screen does not disappear in more than 30 seconds, go to previous page.
And there things stay. Going back to look at the firewall I can see the change haven't been applied, and going to apply just results in the same. No error, just no anything. It also took numerous attempts to get firewall modification to be swtich on although finally at about the eighth attempt changes were enabled. Only now I can't apply them ...
View 5 Replies
ADVERTISEMENT
Jul 8, 2014
I am unable to disable or modify the firewall by using the plesk firewall extention. Plesk throw the two errors below:
Code:
Error: Could not disable firewall:
util_exec(.., 'proc_open') failed: file does not exist or is not executable: /opt/psa/admin/bin/modules/firewall/register_service
Code:
Error: Could not activate firewall configuration:
util_exec(.., 'proc_open') failed: file does not exist or is not executable: /opt/psa/admin/bin/modules/firewall/safeact
I checked the symlinks, they point to the same location: /opt/psa/admin/bin/modules/firewall/mod_wrapper
-r-s--x--- 1 root root 18896 Jun 6 10:37 mod_wrapper
View 2 Replies
View Related
Oct 3, 2014
Plesk 12.x
CentOS 6.5
Any method for copying the Firewall (extension) rules from one server to another.
View 2 Replies
View Related
Aug 17, 2014
I am using the plesk firewall and trying to set up SSH rule which only allows from my IP but deny from everywhere else. In previous versions this worked fine by adding an ip selecting Allow from selected sources, deny from others and the icon in the rules would be orange with the lines
allow incoming from xxx.xxx.xxx.xx
Deny incoming from all others
However this no longer works as the deny from all others is not appearing and is not being generated in the iptables by plesk.
View 1 Replies
View Related
Jul 2, 2015
I just have installed plesk panel and when i get to the "Firewall" tool, then clicked on "Enable Firewall Rules Management", proftpd has stopped working properly.URLs....I have preinstalled the server 2 times, and every time i try to edit the firewall rules, proftpd got broken.
View 10 Replies
View Related
Jul 25, 2014
I would like to know if is possible to export Plesk firewall rules from Plesk 9.5.4 to Plesk 11.5.30 with panel.
View 2 Replies
View Related
Sep 26, 2007
Im actually under ddos attack.
I'll be life long grateful is some one can tell me how to allow only my IP address to access the whole vps server, to add ddos protection on it in the end.
I already try, but i'm a dummy already on linux interface.
View 3 Replies
View Related
Dec 8, 2014
What exact file to modify in order to optimize fastcgi settings, then to set default for all websites. Sample code below:
# execute all .php files via php-fpm
location ~ .php$ {
# connect to a unix domain-socket:
fastcgi_pass unix:/var/run/php5-fpm.sock;
fastcgi_index index.php;
[Code] ....
View 4 Replies
View Related
May 6, 2015
We cant' modify any files of my website in WordPress that contain user www-data.
How can you can change the permissions to this user (www-data).
The version is Plesk 12.0.18 Actualización #44
We have also Plesk 11.5 with WordPress and never has www-data user.
View 3 Replies
View Related
Oct 24, 2007
i want removed all ip that are in firewall rules in csf/cpanel
Chain SPAMHAUS (1 references)
num pkts bytes target prot opt in out source destination
1 0 0 DROP all -- * * 91.146.64.0/18 0.0.0.0/0
2 0 0 DROP all -- * * 91.146.112.0/20 0.0.0.0/0
3 0 0 DROP all -- * * 89.35.0.0/23 0.0.0.0/0
4 0 0 DROP all -- * * 89.32.203.0/24 0.0.0.0/0
5 0 0 DROP all -- * * 89.233.64.0/18 0.0.0.0/0
6 0 0 DROP all -- * * 89.208.122.0/23 0.0.0.0/0
7 0 0 DROP all -- * * 89.187.192.0/19 0.0.0.0/0
8 0 0 DROP all -- * * 89.145.128.0/20 0.0.0.0/0
9 0 0 DROP all -- * * 88.206.80.0/20 0.0.0.0/0
10 0 0 DROP all -- * * 88.206.8.0/21 0.0.0.0/0
11 0 0 DROP all -- * * 88.206.64.0/20 0.0.0.0/0
12 0 0 DROP all -- * * 88.206.0.0/17 0.0.0.0/0
13 0 0 DROP all -- * * 88.206.0.0/21 0.0.0.0/0
14 0 0 DROP all -- * * 86.59.160.0/19 0.0.0.0/0
15 0 0 DROP all -- * * 86.59.128.0/17 0.0.0.0/0
16 0 0 DROP all -- * * 86.111.128.0/19 0.0.0.0/0
17 0 0 DROP all -- * * 86.105.230.0/24 0.0.0.0/0
18 539 37022 DROP all -- * * 85.255.112.0/20 0.0.0.0/0
19 0 0 DROP all -- * * 83.223.240.0/22 0.0.0.0/0
20 0 0 DROP all -- * * 83.223.224.0/19 0.0.0.0/0
21 0 0 DROP all -- * * 81.95.144.0/20 0.0.0.0/0
22 0 0 DROP all -- * * 81.29.240.0/20 0.0.0.0/0
23 0 0 DROP all -- * * 81.17.16.0/20 0.0.0.0/0
24 0 0 DROP all -- * * 78.95.128.0/20 0.0.0.0/0
25 0 0 DROP all -- * * 72.21.128.0/20 0.0.0.0/0
26 0 0 DROP all -- * * 69.8.176.0/20 0.0.0.0/0
27 393 27185 DROP all -- * * 69.50.160.0/19 0.0.0.0/0
28 0 0 DROP all -- * * 69.50.16.0/20 0.0.0.0/0
29 0 0 DROP all -- * * 66.55.160.0/19 0.0.0.0/0
30 0 0 DROP all -- * * 66.37.112.0/20 0.0.0.0/0
31 0 0 DROP all -- * * 66.185.112.0/20 0.0.0.0/0
32 0 0 DROP all -- * * 66.102.32.0/20 0.0.0.0/0
33 0 0 DROP all -- * * 65.255.32.0/20 0.0.0.0/0
34 0 0 DROP all -- * * 64.28.176.0/20 0.0.0.0/0
35 0 0 DROP all -- * * 64.255.128.0/19 0.0.0.0/0
36 0 0 DROP all -- * * 63.246.32.0/20 0.0.0.0/0
37 0 0 DROP all -- * * 58.83.0.0/22 0.0.0.0/0
38 0 0 DROP all -- * * 58.65.238.0/23 0.0.0.0/0
39 0 0 DROP all -- * * 58.65.232.0/21 0.0.0.0/0
40 0 0 DROP all -- * * 217.69.112.0/20 0.0.0.0/0
View 4 Replies
View Related
Jun 9, 2015
I have a Real Time Web Application Security Rules Subscription. I change the ModSecurity Rule Setup and add the Atomic LoginData to Plesk. All looks fine but the ModSecurity Log is now empty.
- Debian 7 with all Updates
- Plesk Version 12.0.18 Update #49
Output from: ~# aum -df upgrade asl
[URL] ....
View 1 Replies
View Related
Sep 9, 2014
Why isnt Plesk 12 configuring firewalld under CentOS 7 correctly? We have to manuella enable port 8443 and all other ports manually with firewall-cmd..
View 1 Replies
View Related
May 18, 2014
I am running Plesk 11.5.30 Update #44, Postfix 2.8.14 and Spamassassin 3.3.1 on a Red Hat Enterprise Linux Server 6.5 server. I am looking to update the rules within Spamassassin. I have had a bit of a look and see that a crontab has been created but its a bash script with a comment saying it has been disabled by psa-spamassassin package (/etc/cron.d/sa-update).
Code:
#!/bin/sh
# This task was disabled by psa-spamassassin package
exit 0
Is there a reason why it has been disabled by Plesk? If I update the rules, will it break something?
I have recently added into Postfix RBLs to reduce the amount of SPAM my customers is getting and this is my next step in a list of things that I would like to change.
View 1 Replies
View Related
Apr 7, 2015
How to activate/enable the firewall by cli, does this is possible?
Firewall module is installed.
Option in plesk GUI working well.
Does this is possible ? If yes how ?
View 2 Replies
View Related
Jan 15, 2015
Is that possible to block baidu without specifying whole list of IDs it's using ?
View 1 Replies
View Related
Dec 17, 2014
I have these problems since version 11.5. Now I have installed version 12 on centos . FTP works fine and is super fast and speedy until i enable PLEK FIREWALL, I also tried to add passive port range 60000-65534 to Plesk Firewall rules.
But nothing works.
It takes like 10 times longer to Login + List Files + Make changes using FTP. We applying changes via FTp and its very slow. We can use plesk file manager but its very inconvenient way for quick file uploads and changes.
View 1 Replies
View Related
Nov 26, 2013
I already posted this as a bug report and now wanted to inform other users.
Starting with Plesk 11.5, the file "/opt/psa/var/modules/firewall/firewall-emergency.sh" contains the following line:
Code:
rm -f /opt/psa/var/modules/firewall/active.flag
That line stems from updating
Code:
Preparing to replace psa-firewall 11.0.9-debian6.0.build110120608.16 (using .../psa-firewall_11.5.30-debian6.0.build115130819.13_amd64.deb) ...
Unpacking replacement psa-firewall ...
Now, when you stop the firewall, you cannot start it again, cause deleting the active.flag disables the firewall:
Code:
# ll /opt/psa/var/modules/firewall/active.flag
-rw-r--r-- 1 root root 0 2013-11-26 09:22 /opt/psa/var/modules/firewall/active.flag
# /etc/init.d/psa-firewall stop
psa-firewall: firewall successfully disabled
# ll /opt/psa/var/modules/firewall/active.flag
ls: cannot access /opt/psa/var/modules/firewall/active.flag: No such file or directory
# /etc/init.d/psa-firewall start
psa-firewall: service is disabled
You then have to manually "touch" the active.flag to be able to start the firewall again. A workaround is to remove the line:
Code:
sed -i 's:rm -f /opt/psa/var/modules/firewall/active.flag::' /opt/psa/var/modules/firewall/firewall-emergency.sh'
I really hope that Parallels fixes this asap, as normally you won't notice that the firewall is not active when every works fine (nothing is blocked) and Plesk still shows all the rules.
View 14 Replies
View Related
May 26, 2015
I currently have the Web Application Firewall (ModSecurity) installed but would like a visual interface to block IP's, subnets etc.. Can I install the Plesk firewall as well without any conflict with the Web Application Firewall?
View 3 Replies
View Related
Sep 14, 2014
I have a brand new and fresh installed server with:
Parallels Plesk v12.0.18
openSUSE 13.1
My Problem is, every day i have to click on activate in the settings of the firewall. Otherwise i have no Mail. The rest (Hosting, etc.) works fine.
No changes in the firewall settings where made, just a migration from my old server.
View 6 Replies
View Related
May 15, 2014
Plesk Firewall has no effect on IPv6?
I am writing today regarding the Plesk Firewall. It seemed to be pretty handy for quickly blocking troublesome users from *replace-with-whatever-IP-block-is-giving-you-trouble*. Yet I am unable to block IPv6 addresses, and the fire wall seems to let some blocked IPv4s right in. I did not see any distinction as to v4 or v6 in the Firewall dialog for adding custom rules, so...
The question is...
(1) Is the Plesk Firewall *supposed* to apply rules to IPv6 by default?
If yes...
(2) Is there a setting or a switch that has to be configured for this to work?
If yes...
(3) Where are said configuration options located?
Okay, when I run /sbin/ip6tables -L (CentOS) I get output that resembles the iptables (no 6) output, only... what, converted to IP6? Not sure. Example output:
DROP tcp ::ffff:31.0.0.0/104 ::/0 tcp dpts:1:10000
In that particular instance I added a drop for the 31.0.0.0/8 block (using the Plesk Firewall interface), in order to create the script that's loaded into iptables (and ip6tables as well, apparently) when one elects to "Apply Configuration". It worked great, executed perfectly, and the iptables output list output looked to be (and remember, I have grossly insufficient background knowledge in this area) accurate.
Yet at the time of this writing I can see via live traffic monitor that an address in the 31.0.0.0/8 block (IPv4) is pounding away at a website. This is curious, as the live traffic monitor indicates an IPv4 address. So... can an IPv4 address be detected and recorded from a host that is only able to connect via IPv6? While an interesting question, I was more concerned with just blocking the IPv6 address and get more academic with it later.
But this raises another question; why would Plesk populate ip6tables and not provide an interface to actually submit IPv6 addresses.
View 1 Replies
View Related
Aug 23, 2014
When I modify rules using the firewall panel it is not generating rules correctly when selecting allow from selected sources deny from others.
View 2 Replies
View Related
Oct 25, 2014
Running plesk 12.018 on OpenSUSE 13.1
What causes the firewall to change / reset itself periodically? I enabled the plesk firewall, but some time later it is reset itself and switched to the opensuse firewall (completely different rule set, which blocks most of the ports).
I then disabled the plesk firewall and loaded my own iptables rule set via iptables-restore command. However a few hours later, it also gets reset to the opensuse firewall. The std. opensuse firewall closes most of the ports, so then our email is blocked.
I would like to permanently switch off any plesk handling of the firewall and manage the iptables myself. How to do this?
I also have fail2ban running and defined my own jail.local files.
View 3 Replies
View Related
Jun 10, 2009
i need to modify a domain name in plesk. is that possible without having to recreate the account or losing the info?
for example from [url]to [url]
View 2 Replies
View Related
Jun 26, 2014
After upgrading to Plesk 12 the FTP connection has become very slow. Mode Security, Fail2Ban and Plesk Firewall have been enabled, the security is set to force sFTP and maximum security and in /etc/proftpd.d/ a conf file has been added to set the passive ports that have been opened in the Plesk Firewall (60000 to 62000)
Turning off the Mod Security does not solve the slow connection.
What can we do to detect the cause of the problem?
View 3 Replies
View Related
Oct 24, 2014
I have enabled modsecurity system and in 1 day the modsec_audit.log file has grown to more than 700Mb. Is there any way to reduce the number of messages that this module logs?
View 4 Replies
View Related
Jun 18, 2014
Since the update I have a problem with my Firewall. I need to set "Allow all incoming connections" under "Server => Firewall" in order to connect over FTP with TLS (explicit). This was working before the update without allowing all incoming connections. How to fix this in the Plesk panel?
View 2 Replies
View Related
Aug 25, 2014
How do we redirect port in Plesk firewall module without touching iptables? I saw forwarding but there was no destination port.
View 1 Replies
View Related
Mar 1, 2015
I have some issues with the plesk firewall:
1. Emails are not delivered:
From some reasons, plesk is blocking incoming 25 port (in plesk shows opened, but it's not)My emails are delivered trough port 25, after doing some tests ( i've sent some emails to an email account hosted in the server) there was no email in the roundcube inbox! All emails were blocked...
a) Firewall was blocking the port 25 on server restart.
b) I have succesfully unblocked it from plesk manager -> tools -> edit/change -> even if i didn't change anything, i saved the "changes" and in my roundcube inbox i recived all the test emails.
c) In /var/log/maillog there is no error.
2. Passive FTP gets blocked in the same way, to successfully connect FireFTP on passive mode i need to repeat 1.b steps even if i've created a special rule to prevent the blocking, opening 49152-65534 ports and set PassivePorts 49152 65534 in /etc/proftpd.conf
The issue appears randomly, because in the last 5 days i didn´t restart the server, the last time i checked it worked. Today, without touching anything, firewall blocked my passive FTP and I had probmels reciving emails from gmail, yahoo etc...
View 2 Replies
View Related
Jul 21, 2014
I am having trouble connecting to my ssh server. It responds with a lengthy error message about no network etc. but it is the last message that concerns me:
Sometimes, such troubles can be caused by a misconfigured firewall.
How can I check the firewall if I cannot connect to ssh? I am running plesk 11.5 control panel and CentOS 6. Is this something I can do from plesk?
I can see that the firewall in plesk is set to allow all for ssh, but I cannot see way to disable the firewall to test ssh connection. Can this be done from plesk?
View 3 Replies
View Related
Mar 28, 2015
In plesk I have set the ssh rule to allow from source, deny others and added my IP. However, if I connect my PC to my work VPN, I can still login via ssh, even when I am on a different IP as the allowed IP
View 18 Replies
View Related
