We want to implement NFS mount and do backups via NFS mount. We want to know
whether there is any risks in doing this. Is it stable?
Can we use NFS for backing up cpanel servers ?
We want to know whether is there any advantages or disadvantages of using NFS
to have cPanel backup. Will it cause the server to crash?
I have tried the cPanel tool to mount, format, etc. My drive however, it has made my server crash after reboots.
I have to enter single user and remove the lines added to fstab so it will boot.
I tried using the tool again and it failed yet again, can I do it manually, and if so how.
I will have to redo the entire partition, so how do I erase everything first?
I have transfer full backup with cpanel to ftp backup,
But,How transfer full backup from FTP Backup to cPanel?
Whitch software?
i have a server has problem,
i want to copy the files of the problemed server to another one,
how can i mount the hd of the problemed server to another running server?
my server is centos 5.3
I have 2 servers connected through a private network.. I wanted to remotely mount a folder on one of the servers. However when i do it gives me permission error..
On the server
1. Iptables are stopped
2. Exportfs shows the result fine
3. entry in hosts.allow and /etc/hosts is made
4. NFS is running fine
On the client:
1. NFS shows some error
Quote:
service nfs restart
Shutting down NFS mountd: [FAILED]
Shutting down NFS daemon: [FAILED]
Shutting down NFS services: [FAILED]
Starting NFS services: [ OK ]
Starting NFS quotas: Cannot register service: RPC: Unable to receive; errno = Connection refused
rpc.rquotad: unable to register (RQUOTAPROG, RQUOTAVERS, udp).
[FAILED]
2. Have done the entry is hosts.allow
3. Stopped iptables
4. when i mount i get this error
Quote:
mount -v 10.252.5.34:/mtest mtest
mount: no type was given - I'll assume nfs because of the colon
mount: trying 10.252.5.34 prog 100003 vers 3 prot tcp port 2049
mount: trying 10.252.5.34 prog 100005 vers 3 prot udp port 901
mount: 10.252.5.34:/mtest failed, reason given by server: Permission denied
However i read somewhere that NFS should be running on server and not necessary on client. But this error
I recieve an error related to tmp directory while i try to install something. How can i mount it without a problem?
./xxxxx.Linux.i386.rpm.bin: /tmp/xxxxx_test.sh: /bin/sh: bad
interpreter: Permission denied
./xxxxx.Linux.i386.rpm.bin: The directory '/tmp' is mounted with no execution permissions.
File: /etc/fstab
Code:
/dev/VolGroup00/LogVol00 / ext3 defaults,usrquota 1 1
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs noexec,nosuid 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
/swapdosya swap swap defaults 0 0
/tmp /var/tmp ext3 defaults,bind,noauto 0 0
/var/tmpMnt /tmp ext3 loop,rw,noexec,nosuid,nodev 0 0
I'm trying to mount a western digital external hd to a fedora core server. Does anyone know what I put in the file system line in /etc/fstab? I tried tmpfs but I couldn't see the files i placed there when I moved to a new server. I also tried vfat but that wasn't compatible. It couldn't read ext3 file system. Does anyone know what else I could try?
View 3 Replies View RelatedI wanted to mount a folder located on server A to server B like we do in NFS.
But i wanted to use another software as nfs isnt working
Mine is Centos 5
I tried to mount second harddisk, but i faced error "mount: you must specify the filesystem type", please help, see below
Code:
[root@s ~]# fdisk -l
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 38913 312464250 8e Linux LVM
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 19457 156183930 8e Linux LVM
[root@s ~]# mkdir /mnt/hd2
mkdir: cannot create directory `/mnt/hd2': File exists
[root@s ~]# mount /dev/sdb2 /mnt/hd2
mount: you must specify the filesystem type
I currently have a VPS. I have installed cPanel/WHM + CSF Firewall.
Everything is fine and all the ports are closed except for the ones I need.
I currently have some issues I need to fix, but google isn't helping
Quote:
Check /tmp is mounted as a filesystemWARNING/tmp should be mounted as a separate filesystem with the noexec,nosuid options set
I tried googling this and there was a cPanel script but I do not have permission to run it. So does anyone mind explaining it to me one step at a time?
Quote:
You should consider adding ini_set to the disable_functions in the PHP configuration as this setting allows PHP scripts to override global security and performance settings for PHP scripts. Adding ini_set can break PHP scripts and commenting out any use of ini_set in such scripts is advised
I have disabled this in php.ini but I do not know why it still says that I have to fix this
What options or tools are available to mount your VPS from a Windows XP desktop?
View 7 Replies View RelatedI have a few folders mounted, but sometimes it drops off the network when the NFS server got rebooted or what not... how do I make sure that it's automatically remounted if the folder goes blank? Is there a way to do this?
View 4 Replies View RelatedI'm not good at linux. I have install cpanel on hdd 1. I added hdd 2 to server, but i can access this hdd 2. Please tell me how to mount hdd 2 for me.
I used fdisk -l and I found 2 hdd, but only sda I can access and sdb can't not.
Thank you
Code:
root@viva [~]# fdisk -l
Disk /dev/sda: 147.0 GB, 147086327808 bytes
255 heads, 63 sectors/track, 17882 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 1318 10482412+ 83 Linux
/dev/sda3 1319 2623 10482412+ 83 Linux
/dev/sda4 2624 17882 122567917+ 5 Extended
/dev/sda5 2624 2884 2096451 83 Linux
/dev/sda6 2885 3015 1052226 83 Linux
/dev/sda7 3016 3269 2040223+ 82 Linux swap / Solaris
/dev/sda8 3270 17882 117378891 83 Linux
Disk /dev/sdb: 147.0 GB, 147086327808 bytes
255 heads, 63 sectors/track, 17882 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 1318 10482412+ 83 Linux
/dev/sdb3 1319 2623 10482412+ 83 Linux
/dev/sdb4 2624 17882 122567917+ 5 Extended
/dev/sdb5 2624 2884 2096451 83 Linux
/dev/sdb6 2885 3015 1052226 83 Linux
/dev/sdb7 3016 3269 2040223+ 82 Linux swap / Solaris
/dev/sdb8 3270 17882 117378891 83 Linux
I want to use DD to fully duplicate a HD, however, the HD is 120GB and also have a mount folder that is 2TB. If I use DD, will it also trying to copy that 2TB onto my 2nd HD?
View 3 Replies View Relatedmount secondary H.D.D to /backup, but i have following error after run "mount /dev/sdb1 backup"
mount: unknown filesystem type 'ntfs'
How can change secondary hard disk file system to linux?
I'm running centos 4.4 and i just installed another HD... seems like everytime I reboot the server, my mount is gone... This is what I have in my fstab:
mount /dev/sdb1 /drive2 defaults 1 3