Installing PHP5 GD Library
Jul 21, 2009I keep seeing instructions on installing using apt-get install php5-gd to install it, but when I do that my server says unknown command....
View 4 Replies
ADVERTISEMENT
Installing Php5
Mar 27, 2008I recently installed ubuntu 7.10, and apache2. Both installed with no problems. In my browser i am able to type localhost, and i recieve the "It works" page. I can also start,stop and restart with no problems. However, I cannot install php5. I use synaptic package manager to install, and i added the appropriate lines to the httpd.conf file but i still cannot view .php files. I try to run a simple php page and a dialog box pops up prompting me to open or save the file. If i choose either, the box just pops up again.
View 15 Replies View RelatedLow Memory After Installing Mysql Mod Php5
Nov 6, 2009I have a VPS.
I have installed "Lighttpd, php5cgi, mysql-server, mysql-client,
libmysqlclient15-dev"
I have optimized the MySQL Server (/etc/mysql/my.cnf).
All these together just take 30 mb Memory.
Lighttpd use just 12mb memory And everything is very good.
But,
When I install php5 mod MySQL:
apt-get install php5-mysql
Then the Lighttpd memory increases to 90mb!
I am using updated Debian Lenny, MySQL5, php5.
LAMP:httpd Doesn't Run After Installing PHP5
Jul 6, 2007After install MySQL and Apache, everything went well, I tested web server and it was OK. but after I installing PHP, httpd just simply don't run.
When I tried to run httpd, nothing was happened as showing below
[root@localhost ~]# /usr/local/apache/bin/apachectl start
[root@localhost ~]# ps aux |grep httpd
root 2809 0.0 0.2 4988 672 pts/0 S+ 06:52 0:00 grep httpd
[root@localhost ~]#
-----------------------------------------
CentOS 5
MySQL: 5.0.41
httpd-2.2.4
PHP-5.2.3
------------------------------------------
Installation Details
groupadd -g 103 mysql
useradd -u 103 -g mysql mysql
groupadd -g 104 web
useradd -u 104 -g web web
MySQL
./configure --prefix=/usr/local/mysql
--with-extra-charsets=all
--enable-thread-safe-client
httpd
./configure --prefix=/usr/local/apache
--disable-status
--disable-asis
--disable-cgid
--disable-userdir
--disable-cgi
--with-mpm=worker
--enable-so
--enable-deflate
--enable-rewrite
PHP
./configure --disable-all
--with-apxs2=/usr/local/apache/bin/apxs
--with-pcre-regex
--with-zlib-dir
--with-dom-xslt
--with-dom-exslt
--with-gd
--with-jpeg-dir
--with-png-dir
--with-ttf
--with-freetype-dir
--enable-gd-native-ttf
--enable-gd-jis-conv
--with-iconv
--enable-mbstring
--with-mysql=/usr/local/mysql
--with-mysqli=/usr/local/mysql/bin/mysql_config
--with-pdo-mysql=/usr/local/mysql
--enable-pdo
--enable-sockets
--with-dom
--with-xmlrpc
--with-xslt-sablot
--enable-xslt
--enable-soap
--enable-zip
--enable-libxml
--enable-simplexml
--enable-exif
--with-pear
--enable-xml
httpd.conf
User web
Group web
------------------------------------------------------------
GD Library
Feb 7, 2007I have got error while install GD Library on my VPS (CentOS, cPanel)
Code:
root@sv1 [~]# yum install php-gd
Setting up Install Process
Setting up repositories
update 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
primary.xml.gz 100% |=========================| 80 kB 00:00
update : ################################################## 232/232
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
File "/usr/share/yum-cli/yummain.py", line 97, in main
result, resultmsgs = do()
File "/usr/share/yum-cli/cli.py", line 470, in doCommands
return self.installPkgs()
File "/usr/share/yum-cli/cli.py", line 836, in installPkgs
self.doRepoSetup()
File "/usr/share/yum-cli/cli.py", line 75, in doRepoSetup
self.doSackSetup(thisrepo=thisrepo)
File "__init__.py", line 260, in doSackSetup
File "repos.py", line 287, in populateSack
File "sqlitecache.py", line 96, in getPrimary
File "sqlitecache.py", line 89, in _getbase
File "sqlitecache.py", line 373, in updateSqliteCache
File "/var/tmp/python-sqlite-root//usr/lib/python2.3/site-packages/sqlite/main.py", line 244, in execute
_sqlite.DatabaseError: unable to open database file
root@sv1 [~]# yum install php-gd
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
update : ################################################## 232/232
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
File "/usr/share/yum-cli/yummain.py", line 97, in main
result, resultmsgs = do()
File "/usr/share/yum-cli/cli.py", line 470, in doCommands
return self.installPkgs()
File "/usr/share/yum-cli/cli.py", line 836, in installPkgs
self.doRepoSetup()
File "/usr/share/yum-cli/cli.py", line 75, in doRepoSetup
self.doSackSetup(thisrepo=thisrepo)
File "__init__.py", line 260, in doSackSetup
File "repos.py", line 287, in populateSack
File "sqlitecache.py", line 96, in getPrimary
File "sqlitecache.py", line 89, in _getbase
File "sqlitecache.py", line 373, in updateSqliteCache
File "/var/tmp/python-sqlite-root//usr/lib/python2.3/site-packages/sqlite/main.py", line 244, in execute
_sqlite.DatabaseError: unable to open database file
I have contacted cPanel Support but the issues isn't resolved.
Mod_layout And GD2 Library
Mar 28, 2009I using on my server mod_layout and GD2 library of course too. Today I detect problem with GD2 lib.
In the vhosts where are define mod_layout, GD library NOT RUNNING! When I try delete a mod_layout define variables, GD lib run wtihout any problems.
I try to find something about it on google, but I found nothing.
CURL Library
Jan 9, 2009Do you know what cURL Library means?
I have seen that in apthost.com reseller plan.
How To Install GD Library
Apr 28, 2009how to install gd library via ssh
OS = centos5
I tried ( found on some site ) but still my script showing same gd error -
yum install php-gd
service httpd restart
if the above command effect my server performance? if yes then how could i uninstall ( Undo ) it...
How To Compile GD Library With TTF For PHP
Oct 27, 2008First of all, here's the info about my server:
Linux: CentOS 5.2
PHP: 5.2.6
PHP-GD: php-gd.i386 0:5.2.6-jason.1
Apache: 2.2.8 with mod_proxy (Lighttpd serves in the background)Question:
I've built my server with PHP 5.2.6 and Apache and I've also installed php-gd by running 'yum install php-gd', but an application (clip bucket) I'm using requires GD with TTF enabled for the cpatcha image in 'singup'. I've checked my phpinfo [url] but didn't seem to find TTF enabled with my GD, so I wonder how to recompile GD with TTF enabled?
GD Library Install
Feb 3, 2007My server is new, I have installed GD Library, but not ok
Code:
root@sv3 [~]# up2date php-gd
Fetching Obsoletes list for channel: centos4-Base...
Fetching Obsoletes list for channel: centos4-Updates...
Fetching Obsoletes list for channel: centos4-extras...
Fetching Obsoletes list for channel: centos4-addons...
Fetching rpm headers...
########################################
Name Version Rel
----------------------------------------------------------
php-gd 4.3.9 3.22 i386
Testing package set / solving RPM inter-dependencies...
Downloading headers to solve dependencies...
#######################################
Downloading headers to solve dependencies...
#######################################
Downloading headers to solve dependencies...
########################################
httpd-2.0.52-28.ent.centos4 ########################## Done.
php-4.3.9-3.22.i386.rpm: ########################## Done.
php-gd-4.3.9-3.22.i386.rpm: ########################## Done.
php-pear-4.3.9-3.22.i386.rp ########################## Done.
httpd-suexec-2.0.52-28.ent. ########################## Done.
Preparing ########################################### [100%]
Installing...
1:httpd warning: /etc/httpd/conf.d/welcome.conf created as /
etc/httpd/conf.d/welcome.conf.rpmnew
warning: /etc/httpd/conf/httpd.conf created as /etc/httpd/conf/httpd.conf.rpmnew
warning: /etc/httpd/conf/magic created as /etc/httpd/conf/magic.rpmnew
########################################### [100%]
error: unpacking of archive failed on file /etc/httpd/logs: cpio: rename
There was a fatal RPM install error. The message was:
There was a rpm unpack error installing the package: httpd-2.0.52-28.ent.centos4
root@sv3 [~]#
how to install it?
GD Library & PHP Mbstring Extension
Jun 11, 2009I install drupal and i get this errors:
1. GD libraryNot installed
The GD library for PHP is missing or outdated. Please check the PHP image documentation for information on how to correct this.
2. Unicode libraryStandard PHP
Operations on Unicode strings are emulated on a best-effort basis. Install the PHP mbstring extension for improved Unicode support.
I have on my server:
Package gd-2.0.33-9.4.el5_1.1.x86_64 already installed and latest version
Package gd-2.0.33-9.4.el5_1.1.i386 already installed and latest version
but i don`t know why drupal say to me it`s not installed. Need to active the GD Library?
How can i fix the problem with php mbstring and GD Library?
I run the yum commands:
yum install gd
yum install php-gd
yum install php-mbstring
It`s not working! :|
The os is centos 5.3 64. I have cPanel too.
Install GD Graphics Library 2 (GD2)
Jun 22, 2008how to install GD Graphics Library 2 (GD2) ?
View 5 Replies View RelatedCompaile Php With Java Library
Dec 15, 2008When i compile php 5.2.8 with following option ---->
./configure --with-java=/usr/local/j2sdk1.4.2_19/
it say this is not valid option.
how can i do it and howto compile php with java?
Compiling The Zip Library On MAMP
Mar 10, 2008I am having some serious trouble compiling the zip extension for my MAMP installation. I used this tutorial here (using phpize):
[url]
All is well.. but when I run make test it gives me this:
Warning: PHP Startup: Invalid library (maybe not a PHP library) 'zip.so' in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/imap.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/yaz.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/mcrypt.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/gettext.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/pgsql.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/pdo_pgsql.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/pdo_mysql.so' - (null) in Unknown on line 0
Warning: PHP Startup: Invalid library (maybe not a PHP library) 'zip.so' in Unknown on line 0
Warning: PHP Startup: Invalid library (maybe not a PHP library) 'zip.so' in Unknown on line 0
Warning: PHP Startup: Invalid library (maybe not a PHP library) 'zip.so' in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/imap.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/yaz.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/mcrypt.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/gettext.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/pgsql.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/pdo_pgsql.so' - (null) in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library 'modules/pdo_mysql.so' - (null) in Unknown on line 0
Warning: PHP Startup: Invalid library (maybe not a PHP library) 'zip.so' in Unknown on line 0
Warning: PHP Startup: Invalid library (maybe not a PHP library) 'zip.so' in Unknown on line 0
So, from what I see there are two problems:
1. compiling the zip.so fails...
2. Some directories are wrongly set, because my extension .so files reside in /mamp/bin/php5/lib/php/extensions/no-debug-non-zts-20050922/
I see no "modules" in there, so..
Adding The GD Library To A Linux Box
Mar 31, 2007Trying to install the GD graphics library to a linux box.
Downloaded the file gd-2.0.34.tar.gz from [url]
Ran gunzip and tar thus expanding the files to a temp directory - as root.
The instructions say to run ./configure
I ran "sh ./configure" and I get the following:
Quote:
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking if we are building a Cygwin target... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.
why the configuration fails?
Godaddy Hosting, Mod_rewrite And GD Library
Aug 30, 2006I got a domain name with 123-reg and hosting at godaddy, set up the dns and got everything working fine.
I created a script in PHP in a .png file with the help of a .htaccess, the script basically outputs an image with the name of the filename. So say if the .png was called image.png which had the code in, I could call image.png and it would output 'image', if I called foo.png it would output 'foo' - with the help of mod_rewrite where i redirected all .png requests to the proper image.png which had the code in.
Phew. Now I uploaded the files to godaddy and the .htaccess and I just cannot get the image to output properly, it works locally but not on the godaddy server, no image is output at all, i think it is a mod_rewrite problem.
Has anyone got any ideas how I could solve this? I'll paste some example code if it will let me to help you get an idea.
the .htaccess:
Code:
AddType application/x-httpd-php .png
<Files .+.png>
ForceType application/x-httpd-php
</Files>
RewriteEngine On
RewriteBase /
RewriteRule ^(.+).png$ image.png
the image.png with PHP code:
PHP Code:
<?php
@header ("Content-type: image/png");
$img = @imagecreatetruecolor(20, 20) or die ("Problem.");
$cBlack = imagecolorallocate ($img, 0, 0, 0);
imagefill($img, 0, 0, $cBlack);
imagepng ($img);
imagedestroy($img);
?>
This is just a simple test to get it to work.
Has anyone any ideas or is this post in the wrong forum?
Checking Versions Of Library/so Files
Apr 14, 2009Different problem than my earlier thread:
[url]
I freely admit this is something that is self inflicted as I made the mistake of trying to install OpenSSH from source on my own despite me knowing that OpenSSL was kinda goofy (as in I had 0.9.8g and 0.9.8i libraries all over the place).
I know that I have OpenSSL 0.9.8k installed and working. PHP and Apache are both reporting that they are using the k release. I'm good there. However cURL and proftpd are still linking to the g release libraries and for the life of me, I cannot find where these buggers are. ld.so.conf is pointed at the newer libraries in /usr/local/lib and /usr/local/ssl/lib and I re-ran ldconfig to make sure.
Is there a way to verify a version of the library/so files because this is killing me. I'm kinda like Monk (USA TV) only instead of germs, I'm freaked out by lame libraries and includes.
edit: what I *think* is happening, based on the timestamps, is that cURL and proftpd are using the libraries in the /usr/lib64 directory instead of /usr/lib. What I don't get is when I make;make install, why things are only going into /usr/lib and /usr/local/lib and not into the /usr/lib64 directory despite my ./config stating that the libraries are being built for x86_64. Is it as simple as copying things over?
Pre-Installed Script Library From Downtownhost
Aug 19, 2008Community, what does it mean - Pre-Installed Script Library from Downtownhost.com? When I have seen it, I was a little bit baffled with that.
Can anybody clear it up?
Unable To Load Dynamic Library
Jul 18, 2008I have a weird issue with my Plesk VPS. If I restart the VPS it will work find for about 20 minutes and then go down. All my websites will continue to load and load until they time out.
The weird thing is, I can still access everything. FTP, Plesk, SSH. Just no my websites.
Here is the last error I receive before it continues to load:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pgsql.so' - libpq.so.4: cannot open shared object file: No such file or directory in Unknown on line 0
Here are the last few errors in my log:
[Thu Jul 17 19:51:59 2008] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jul 17 19:51:59 2008] [warn] RSA server certificate CommonName (CN) `plesk' does NOT match server name!?
[Thu Jul 17 19:51:59 2008] [warn] RSA server certificate CommonName (CN) `plesk' does NOT match server name!?
[Thu Jul 17 19:51:59 2008] [notice] Digest: generating secret for digest authentication ...
[Thu Jul 17 19:51:59 2008] [notice] Digest: done
[Thu Jul 17 19:51:59 2008] [notice] LDAP: Built with OpenLDAP LDAP SDK
[Thu Jul 17 19:51:59 2008] [notice] LDAP: SSL support unavailable
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pgsql.so' - libpq.so.4: cannot open shared object file: No such file or directory in Unknown on line 0
[Thu Jul 17 19:51:59 2008] [notice] mod_python: Creating 4 session mutexes based on 128 max processes and 0 max threads.
[Thu Jul 17 19:51:59 2008] [warn] RSA server certificate CommonName (CN) `plesk' does NOT match server name!?
[Thu Jul 17 19:51:59 2008] [warn] RSA server certificate CommonName (CN) `plesk' does
NOT match server name!
Apache :: How To Check If GD Library Is Installed
Feb 1, 2007I have a dedicated server and under root i went to Software - Apache Update and on the list i saw GD (version 2.0.15) i am assuming thats GD Library. i checked that and started the build. After everything was done i go back and GD is still unchecked..
View 7 Replies View RelatedImagettftext :: FreeType Library Not Available, Function Does Not Exit
Jul 19, 2008i use VPS linux, And one of my member asked me To help him.
He faced an error that say, 'FreeType library not available. (Function imagettftext does not exist)'
and requested me to avtivate this for him.i have no information about it that how can i do it.
Plesk 11.x / Linux :: PHP Startup - Unable To Load Dynamic Library
May 1, 2015I am troubleshooting a problem where the php5 package was replaced and caused lots of psa/plesk packages to be removed. This system details are;
# cat core.version
11.5.30 Ubuntu 12.04 115140407.17
# lsb_release -a
Description: Ubuntu 12.04.2 LTS
Codename: precise
# uname -a
Linux my.host.name 3.2.0-45-generic #70-Ubuntu SMP Wed May 29 20:12:06 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
The plesk panel is up, the websites are running, and the email services are running, but there are many errors like so;
==> error.log <==
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/json.so' - /usr/lib/php5/20090626/json.so: cannot open shared object file: No such file or directory in Unknown on line 0
I also get the following error when inspecting the json module:
root@vps:/etc/php5/mods-available# php -i|grep -i json
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/json.so' - /usr/lib/php5/20090626/json.so: cannot open shared object file: No such file or directory in Unknown on line 0
/etc/php5/cli/conf.d/20-json.ini,
[Code] ....
What I need to install to get that json.so file back?
PHP5 Into My IIS Server
Jan 1, 2009I have just installed PHP5 into my IIS server and want to install projectpier
1st problem: When I go to [url]I get the errorThis Virtual Directory does not allow contents to be listed.
There is an index.php in there but doesn't load even though I have specified it as a default content page in the website..
2nd problem: After I manually browse to the install page I get the following errors:
#Error: /config/config.php is not writable
# Error: /public/files is not writable
# Error: /cache is not writable
# Error: /upload is not writable
I have realised that permissions are not setup right so I went and gave cart blanche access to the folder for any user..it worked but is far from secure.What is the best way to do this?
When installing web applications like this are they usually done from the servers browser where the server is the only one with full access.I tried this and it didn't work.
Apt-get Php5 Or From Source
Jan 20, 2008Running ubuntu server 6 if I apt-get php5 the version I get is 5.1.2.
Now the latest version on the php.net site is 5.2.5.
Does it really make much of a difference if I'm slightly below current? What are your thoughts please?
I know if I go compiling from source php and mysql are difficult to get working together which is why I like the apt-get method.
Can We Run Both PHP4 And PHP5 Together
Jul 27, 2008We have a client which site requires PHP4, not PHP5 to run. Can we run both PHP versions alongside each other? Apparently, their site will only work in PHP4. We are running Plesk 8.3.0 for Linux.
View 8 Replies View Related