On my webserver I host about 10 websites. I want to set up a subdomain of webmail.domain that works for all the domains but goes to the same squirrelmail install. Is there an easy way to do this or do I need to add code for each domain?
View 9 Replies
In order to get conntrack/csf to work, do i need to also upgrade iptables?
View 2 Replies View RelatedI'm about to switch from APF to CSF and would like to use it on an upcoming server.
My question is after installation and adding the required ports on csf.conf, the next step would be just to start both CSF and LFD and I'm good to go? That's it?
Could someone recomend some cheap rails(or a supplier of) for a 4u generic box with the screw holes along the middle?
I stumbled accross webhostingtalk.com/showthread.php?t=564036 from a few years back, but it seems to talk mostly about shelving.
Chenbro.co.uk have a set to fit "99%" of cases, does anyone have any experiences with these?
I am trying to track down a suppler for very cheap generic 2U cases.
I need some both short in length and standard in length (Micro ATX and Standard).. Anything that will take a standard ATX PSU and components would do the job.
They will need to be shipped to Australia/New Zealand so anywhere close is a bonus (Aust, Asia ect.)
I have looked at some of the Norco cases ect. However I feel the price is still to high.
I just picked up a WiredTree VPS account, but have never really dabbled deep into server-related knowledge. I was wondering what one would do to rid of the "Great Success!
Apache is working on your cPanel® and WHM™ Server" pages when subdomains are accessed?
Wordpress installation (WPML with 3rd level domain es. site. com, fr. site. com).
I need to redirect page from subdomain to a new subdomain
Example:
esp.site.com/oldpage -> es.site.com/newpage (different subdomain)
esp.site.com/oldpage1 -> es.site.com/newpage
esp.site.com/oldpage2 -> es.site.com/newpage
Source site is very chaotic and there are no clear rule for redirection (no regex )
So I need to redirect every page but syntax:
Redirect 301 esp.site.com/oldpage http:// es.site.com/newpage
doesn't work!
which is the correct syntax ?
Can I manage all from one .htaccess file in main root (www) or should I create "esp" directory (and point old subdomain to it - one for every language) and put .htaccess in every directory with redirection ?Â
Usually our website traffic is about 50 MB/day in our dedicated server. From these past 2 days it's consuming 5 GB/day and Apache2 opens so many processes/connections that our router can't handle and turns our WAN/LAN extremely SLOW!
If the reboot the server, it calms down but soon the apache2 starts again to open the connection (+1000).
Can this be a worm? I'm using Ubuntu Server 8.04.
I am still running apache 1.3 something on my debian vps but debian would really like to upgrade to apache 2 (Ie PHP5 updates).
So I wanted to ask what the advantages and disavantages of running apache2 is?
Can apache2 use a 1.3 httpd.conf?
Ive had this problem numerous times (website failed to connect error) before and the web management team tell me that apache2 needs to be restarted, seeing as they are not replying to my emails im gona try and do it myself.
i open up putty, login as root user, then what?
I have a problem. When MSN Search robot looks through my VPS, the machine is going "asleep", e.g. Apache2 (Port 80) doesn't answer at all. Here is the last falling:
Code:
23:14:15 up 4 days, 9:06, 5 users, load average: 37.18, 31.25, 27.46
I hardly ever can enter 'pkill apache2' to kill Apache2 processes. Here is my Apache2 configuration (timeouts, prefork, e.g.):
Code:
Timeout 30
KeepAlive On
MaxKeepAliveRequests 20
KeepAliveTimeout 5
<IfModule mpm_prefork_module>
StartServers 2
MinSpareServers 2
MaxSpareServers 5
MaxClients 10
MaxRequestsPerChild 400
</IfModule>
Maybe I configured Apache2 wrongly, but I only want to prevent this bad thing.
I just wondered if anyone can help me out with an Apache problem. I currently run Debian 3.1 (on 10 GB space and 256 MB of RAM) with Apache 2.0.59 installed through apt-get.
Apache runs with 10 child processes running simultaneously to handle multiple requests at once. I have set up Apache to use virtual hosts for every single account since they are hosted on their own domains/subdomains.
I put in a crontab to restart Apache every 15 minutes. The reason being is because after a while, Apache will start lagging to display web pages. When it's restarted, it works just fine and fast. After roughly 10 minutes now, it will take roughly a minute for the request to finally send the data back to the browser. It's not the web page that causes it, it's Apache or some factor effecting it's performance.
Does anyone know what the cause may be or how to fix it? Personally, I think it might be a memory issue.
I had php4 running as a module of apache2 on a debian sarge os.
i did the following to upgrade to PHP5
apt-get install php5 libapache2-mod-php5 php5-gd php5-mysql
But when i tried to start apache i got an error message saying that libphp5.so is corrupted or something.. (garbled - perhaps this is not an Apache module DSO?)
Now i just want to retore php4 working as it was !
i did apt-get remove php5 libapache2-mod-php5 php5-gd php5-mysql
and apt-get install php4 libapache2-mod-php4 php4-gd php4-mysql
but i can't find the php4.conf and php4.load on the /modules-enabled or /modules-available
tried to write those files manualy as php4.so exists with other libs.
apache does not load php
Quote:
host:/etc/init.d# apt-get install php4 php4-mysql php4-cli libapache2-mod-php4
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Paquets suggérés :
php-pear php4-pear
Les NOUVEAUX paquets suivants seront installés :
libapache2-mod-php4 php4 php4-cli php4-mysql
0 mis à jour, 4 nouvellement installés, 0 à enlever et 275 non mis à jour.
Il est nécessaire de prendre 0o/3258ko dans les archives.
Après dépaquetage, 6517ko d'espace disque supplémentaires seront utilisés.
Sélection du paquet libapache2-mod-php4 précédemment désélectionné.
(Lecture de la base de données... 35624 fichiers et répertoires déjà installés.)
Dépaquetage de libapache2-mod-php4 (à partir de .../libapache2-mod-php4_6%3a4.4.7-0.dotdeb.0_i386.deb) ...
Sélection du paquet php4 précédemment désélectionné.
Dépaquetage de php4 (à partir de .../php4_6%3a4.4.7-0.dotdeb.0_all.deb) ...
Sélection du paquet php4-cli précédemment désélectionné.
Dépaquetage de php4-cli (à partir de .../php4-cli_6%3a4.4.7-0.dotdeb.0_i386.deb) ...
Sélection du paquet php4-mysql précédemment désélectionné.
Dépaquetage de php4-mysql (à partir de .../php4-mysql_6%3a4.4.7-0.dotdeb.0_i386.deb) ...
Paramétrage de libapache2-mod-php4 (4.4.7-0.dotdeb.0) ...
Paramétrage de php4 (4.4.7-0.dotdeb.0) ...
Paramétrage de php4-cli (4.4.7-0.dotdeb.0) ...
Paramétrage de php4-mysql (4.4.7-0.dotdeb.0) ...
host:/etc/init.d# /etc/init.d/apache2 force-reload
Forcing reload of web server (apache2)...apache2: Syntax error on line 116 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/php4.load: API module structure `php4_module' in file /usr/lib/apache2/modules/libphp4.so is garbled - perhaps this is not an Apache module DSO?
I'm running Apache 2.0.54 on my server and just recently Apache has been giving me problems that I haven't been able to fix permanently. In my error log, Apache marks down "[error] (88)Socket operation on non-socket: apr_accept: (client socket)" roughly 3 to 4 times a second and then turns off. In SSH, I send a restart command and it tells me it's still running but then it says when I restart it again that it wasn't running.
My main concern is fixing Apache from showing this error and from crashing so much. I did some research and through inconclusive evidence, it seems like a crontab error (ironically Apache doesn't use any cron jobs I can see).
I have apache2 and I have minimal webmin 1.330 installed at /webmin/
Following this tutorial: [url]
I have done the commands it asks and I have added this to my sites-available:
Quote:
<VirtualHost _default_>
ServerName panel2.ipalaces.org
ServerAdmin admin@ipalaces.org
DocumentRoot /webmin/
DirectoryIndex index.cgi index.html
<Directory /webmin/>
Options ExecCGI
AuthName Webmin
AuthType basic
AuthUserFile /etc/webmin/htusers
require valid-user
</Directory>
</VirtualHost>
and added this to apache2.conf:
Quote:
SetEnv WEBMIN_CONFIG /etc/webmin
SetEnv WEBMIN_VAR /var/webmin
SetEnv SERVER_ROOT /webmin
SetEnv MINISERV_CONFIG /etc/webmin/miniserv.conf
Am i doing this right? I want to be able to access webmin from the URL panel2.ipalaces.org.
I did
Quote:
htpasswd -c /etc/webmin/htusers brian
and then set a password as "test" for brian. However it won't login.
got the VirtualHost entries for Appache, so each Domain points to a folder.
The (Windows-)DNS runs on the server, means i have to create a new DNS Reverse-Lookup and Folder for each Domain seperatly, but this workflow appears to be pretty stupid..
Now my question:
Anyone can tell me how to setup somwhat a "Wildcard / Catchall DNS", and also "Catchall VirtualHost", so each Domain is automatically pointed to the right folder? Any scripts needed for that?
to move my image host to lighttpd. Does anyone know any step by step tutorial to move to lighttpd?
View 8 Replies View RelatedI have server with fedora core 6 with plesk 8.2
how to make upgrading from apache2.0 to apache 2.2.6?
I am using Plesk 12 / Ubuntu 14.04
In PLESK 11 I could set maxclients, ServerLimit ..... in /etc/apache2/apache2.conf
But I cannot find these settings in apache2.conf.
Where to configure these settings, in which file?
Was browsing a few websites (as you do) and noticed something unusual on a competitor site. They had used the same text as another website I had viewed not long ago.
OUR MISSION
It may sound unbelievable but the majority of the big companies in the web hosting business usually do not invest much in the development of new technologies. Instead they rely on 3rd party solutions and software. Unlike theirs, our hosting software was created, developed and designed in-house by us. Moreover, our business approach is human-oriented in that our client support is a centre factor in the quality hosting service that we offer.
Read that before...?
I just did a google search for the first part of it (including the quotes, so it will only find sites that contain the whole string word for word)...
"It may sound unbelievable but the majority of the big companies in the web hosting business usually do not invest much in the development of new technologies."
Result?
Quote:
Results 1 - 10 of about 9,170 for ... (0.10 seconds)
Isn't it ridiculous when you have 10,000 companies using identical "About Us" text?
I want run mod_deflate in my serve my server is apache 2.0.63
How can I do this?
I have a mobile email application (for Zimbra) that is not compatible with HTTPS, only with HTTP.
Is it possible to configure a Reverse Proxy so I can bypass the SSL? Something like this:
[url]<-> REVERSE PROXY <-> [url]
I was able to configure a Reverse Proxy but when it comes to https, something does wrong! here is my vhost config:
Quote:
NameVirtualHost mail.domain.com:*
<VirtualHost *>
ServerName mail
ServerAlias mail.domain.com
ProxyPreserveHost On
ProxyVia full
SSLProxyEngine On
ProxyRequests On
<proxy *>
Order deny,allow
Allow from all
</proxy>
ProxyPass / https://mail.domain.com/
ProxyPassReverse / https://mail.domain.com/
</VirtualHost>
I have all mod_proxy modules (and its sub-mods) load. If this is possible to achieve, I think it's only a manner of configuration lamess.
Have someone configured anything like this before?
The error logs on my web server keep growing to stupidly large sizes within a couple of weeks.
when i look through the error logs it seems to be showing exactly the same line but just from diffferent Ip addresses. the line is as follows
[Sun May 11 07:11:41 2008] [error] [client ###.###.###.###] File does not exist: /var/www/phpmyadmin/tracker
Since I upgraded to apache2.2 I dont seem to be able to find the "MaxClients" setting in httpd.conf.
I spent some time on google and aparently this has been taken out because apache2 is multi-threaded. What I do know is no more than about 250 people can connect to my server.
Does anyone know who provides fully managed VPS that supports Apache2? I am currently hosting with LiquidWeb and I am happy with their service. However, they only support Apache 1.3 on their managed VPS.
View 7 Replies View RelatedI would like upgrading to apache2.X and PHP5.x I have some question about that, can I find details how can I make upgrade without any problem, in cpanel (aptche upgrade ) what modules can I check it befor upgrading I don't know what need to check ?? is my sites working well without problem after upgrading?
View 8 Replies View RelatedWe have a CentOS sever running Apache 2 with the mod evasive plugin installed. Mod evasive keeps on blocking me though, and adding me to the blacklist, when I am just browsing pages.
Here are my settings:
<IfModule mod_evasive20.c>
DOSHashTableSize 3097
DOSPageCount 6
DOSSiteCount 100
DOSPageInterval 2
DOSSiteInterval 2
DOSBlockingPeriod 600
DOSEmailNotify networkadmin@mydomain.com
</IfModule>
I've had two (or three) versions installed on my Fedora linux server. It seems I've had something installed when I just rented server, after that I've tried to upgrade by building PHP from source.
PHP, installed with yum (before upgrading) had 5.1.6 version. When I ran phpinfo(), browser displayed this version. But when I ran "php -v" in command line, it displayed 5.2.5 version.
I've got this error when server booted up:
Quote:
[20-Nov-2007 03:27:30] PHP Warning: PHP Startup: json: Unable to initialize module
Module compiled with module API=20060613, debug=0, thread-safety=0
PHP compiled with module API=20050922, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
So, I've removed old version(s):
Quote:
rpm -qa | grep php
rpm -e *package*
yum remove php
Then I've downloaded latest version of PHP 5.2.5 and installed it. I've copied configuration list that yum uses for older version:
Quote:
./configure --build=x86_64-unknown-linux-gnu --host=x86_64-unknown-linux-gnu --target=x86_64-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --cache-file=../config.cache --with-libdir=lib64 --with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d --disable-debug --with-pic --disable-rpath --without-pear --with-bz2 --with-curl --with-exec-dir=/usr/bin --with-freetype-dir=/usr --with-png-dir=/usr --enable-gd-native-ttf --without-gdbm --with-gettext --with-gmp --with-iconv --with-jpeg-dir=/usr --with-openssl --with-png --with-pspell --with-expat-dir=/usr --with-pcre-regex=/usr --with-zlib --with-layout=GNU --enable-exif --enable-ftp --enable-magic-quotes --enable-sockets --enable-sysvsem --enable-sysvshm --enable-sysvmsg --enable-track-vars --enable-trans-sid --enable-yp --enable-wddx --with-kerberos --enable-ucd-snmp-hack --with-unixODBC=shared,/usr --enable-memory-limit --enable-shmop --enable-calendar --enable-dbx --enable-dio --with-mime-magic=/usr/share/file/magic.mime --without-sqlite --with-libxml-dir=/usr --with-xml --with-apxs2=/usr/sbin/apxs --without-mysql --without-gd --without-odbc --disable-dom --disable-dba --without-unixODBC --disable-pdo --disable-xmlreader --disable-xmlreader --disable-xmlwriter
make clean
make
make install
After that PHP doesn't work with Apache2. Whe I try to load any .php page, I get PHP source code as simple text instead of result of executed PHP code.
When I install PHP with yum again, it works.
I wonder how can I install latest PHP from source? How to fix the problem with Apache2?
Im running a windows 2003 web edition server with apache 2.2.4 installed and a ported module; mod_dosEvasive, my server is vurnable for some sort of single machine dos attack. Not only my own server is vurnable but basically ANY apache 2.2.4 win32 server, even without additional modules (lik php) installed ( i checked by installing apache2 on 4 machines, all vurnable)
The tool used to attack apache is described here:
[url]
When attacked by the specific syn flood attack apache2 becomes useless and doesnt send any responses out anymore. When the attacker stops sending this flood Apache starts responding again.
how to secure a windows apache server against such an attack?
