after many painstaking hours, im at a loss as to where to go now (finally managed to get up to the point of running phpize in the ffmpeg directory)
...
Originally I thought i had compiled it in when compiling PHP,
Infact:
Code:
'./configure' '--disable-debug' '--disable-rpath' '--with-bz2' '--with-curl' '--with-gd' '--with-openssl' '--with-png' '--with-zlib' '--with-mcrypt' '--with-mysql' '--with-pear' '--enable-bcmath' '--enable-ftp' '--enable-magic-quotes' '--enable-sockets' '--with-ffmpeg=yes' '--with-apxs2=/usr/local/sbin/apxs'
But when i go to the tests/ffmpeg_test.php file I get:
Code:
Warning: dl() [function.dl]: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so' - Cannot open "/usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so" in /usr/local/www/apache22/data/tests/test_ffmpeg.php on line 17
Can't load extension /usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so
I used the ports tree to install FFMPEG and here is the version info:
Code:
bsd# ffmpeg -v
ffmpeg version 0.4.9-pre1, build 4718, Copyright (c) 2000-2004 Fabrice Bellard
built on Mar 14 2007 20:42:22, gcc: 3.4.6 [FreeBSD] 20060305
After finally getting to this point, i say the heck with it and just decide to try and use phpize and compile it in that way as an extension ( following: http://ffmpeg-php.sourceforge.net/ ).
However, after I got phpize to work ( had to cp autoconf259 and autoheader259 to autoconf and autoheader since it was complaining about it ), it gave me this set of errors:
Code:
/bin/sh /usr/local/src/ffmpeg-php-0.5.0/libtool --mode=compile gcc -I. -I/usr/local/src/ffmpeg-php-0.5.0 -DPHP_ATOM_INC -I/usr/local/src/ffmpeg-php-0.5.0/include -I/usr/local/src/ffmpeg-php-0.5.0/main -I/usr/local/src/ffmpeg-php-0.5.0 -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/ffmpeg -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/local/src/ffmpeg-php-0.5.0/ffmpeg-php.c -o ffmpeg-php.lo
gcc -I. -I/usr/local/src/ffmpeg-php-0.5.0 -DPHP_ATOM_INC -I/usr/local/src/ffmpeg-php-0.5.0/include -I/usr/local/src/ffmpeg-php-0.5.0/main -I/usr/local/src/ffmpeg-php-0.5.0 -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/ffmpeg -DHAVE_CONFIG_H -g -O2 -Wall -fno-strict-aliasing -c /usr/local/src/ffmpeg-php-0.5.0/ffmpeg-php.c -fPIC -DPIC -o ffmpeg-php.o
In file included from /usr/local/src/ffmpeg-php-0.5.0/ffmpeg-php.c:25:
/usr/local/include/ffmpeg/avcodec.h:14:27: ffmpeg/common.h: No such file or directory
In file included from /usr/local/include/ffmpeg/avcodec.h:15,
from /usr/local/src/ffmpeg-php-0.5.0/ffmpeg-php.c:25:
/usr/local/include/ffmpeg/rational.h: In function `av_cmp_q':
/usr/local/include/ffmpeg/rational.h:36: error: syntax error before "tmp"
/usr/local/include/ffmpeg/rational.h:38: error: `tmp' undeclared (first use in this function)
/usr/local/include/ffmpeg/rational.h:38: error: (Each undeclared identifier is reported only once
/usr/local/include/ffmpeg/rational.h:38: error: for each function it appears in.)
In file included from /usr/local/src/ffmpeg-php-0.5.0/ffmpeg-php.c:26:
/usr/local/include/ffmpeg/avformat.h: In function `av_init_packet':
/usr/local/include/ffmpeg/avformat.h:48: warning: implicit declaration of function `int64_t_C'
/usr/local/include/ffmpeg/avformat.h:48: warning: integer constant is too large for "long" type
/usr/local/include/ffmpeg/avformat.h:49: warning: integer constant is too large for "long" type
*** Error code 1
Stop in /usr/local/src/ffmpeg-php-0.5.0.
After I get all this working and install it on a another machine I plan on writing a guide for FreeBSD users inside the tutorials section - but this one part has stumped me.
The only thing I can think of is something along the lines of maybe i downloaded a 64 bit version of something along the way?
Should i continue along this route with phpize adding it as an extension, or does someone else have some information on that ffmpeg_test.php file?
I know someone probably asked this question... I am looking for a VPS provider that offers unmanaged VPSes with FreeBSD + Cpanel, 512RAM guaranteed, ~250-300GB bw, and 10-15GB hdd, for a price of $40-55/mo.
Can anyone recommend a good VPS provider that meets the above requirements?
I had is running it on my php4.. I upgraded to php5 using easyapache but now its not working.. Its has the ffmpeg.So in the extenuion folder and php.ini has the extension folder and the extension defined.. Any solution
After much efforts and help of members of this forum i have installed ffmpeg, ffmpeg-php, gd on my server.. Now the purpose for which i have installed all this is to get the thumbnail of the videos..
I tried the code given on its homepage but thats not working..
I've been researching and thinking on offering it on our servers but I still have a few doubts. How resource intensive is it? Does it affect a shared environment too much?
I installed FreeBSD 6.3 with minimum packedges. (pkg.txt on attach)
Install Apache+PHP+MySQL
But then I load Drupal or Magento (CMS) browser say that:
Warning: include_once(includes/install.inc) [function.include-once]: failed to open stream: No such file or directory in /ftp/drupal.web/includes/database.inc on line 129
Warning: include_once() [function.include]: Failed opening 'includes/install.inc' for inclusion (include_path='/usr/local/share/phpmailer') in /ftp/drupal.web/includes/database.inc on line 129
Fatal error: Call to undefined function install_goto() in /ftp/drupal.web/includes/database.inc on line 130
My system is affected with something named __sbmaskrune
I can't connect to FTP at this moment..
I am running FreeBSD
/scripts/ftpup Ftp Setup Script Version 6.1 This is the proftpd installer Searching ports for proftpd .....................................found proftpd in /usr/ports/ftp/proftpd....Done proftpd (1.3.1-1) is already installed. dedi01# /scripts/ftpup --force Ftp Setup Script Version 6.1 This is the proftpd installer /libexec/ld-elf.so.1: /usr/local/lib/libruby18.so.18: Undefined symbol "__sbmaskrune" Removing old ftp server (pure-ftpd) pkg_delete: no packages match pattern(s) The ProFTPd configuration file /usr/local/etc/proftpd.conf appears to be ok! No matching processes were found Waiting for ftpserver to restart..............finished.
We are basically looking for advice on which OS to choose. CentOS appeals as it is basically RHEL - and since people are paying for that they must be doing something right. It is apparently uber stable because the versions have been tested to death... but because the packages are so out of date, or just not there, we will need to install many things from source, which defeats the point to using it for its stability.
FreeBSD seems to have an awful lot of up to date packages, took a look at it on Distrowatch and was very impressed by many are the latest versions. This would make life so much easier because the package manager can handle installs and updates, really can't be bothered with messing around compiling software for install/updates.
In my mind, if an open source project as mature as the likes of Apache, PHP or MySQL, I am pretty sure you are very unlikely to experience problems by using the latest stable version. Surely by using older versions you are more likely to experience problems as of the result of bugs/security exploits that have only been fixed in the more recent releases.
Would you use FreeBSD or CentOS/RHEL? Or are both equally as good?
fdisk /dev/amrd1 ******* Working on device /dev/amrd1 ******* parameters extracted from in-core disklabel are: cylinders=2213 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=2213 heads=255 sectors/track=63 (16065 blks/cyl)
fdisk: invalid fdisk partition table found Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 35551782 (17359 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 164/ head 254/ sector 63 The data for partition 2 is: <UNUSED> The data for partition 3 is: <UNUSED> The data for partition 4 is: <UNUSED>
I get write errors when i use sysinstall. As for the raid status. Its fine.
I've been using FreeBSD for a while now, but I still feel like a novice when looking at top because I don't understand or know what all of the STATES mean. I know that many of them represent different kernal states and certain programs have their own unique STATES, but what do the usuals mean? man top only has 2-3 listed with very vague descriptions.
Does anyone here understand many of them? If so it would be greatly appreciated if you could write up a few of the basic ones.
select nanslp kserel RUN pause lockf kqread sbwait pipered
Those are the ones I currently see in top. I know there are probably thosands of others, but those are the ones I usally look at.
i created a new cron job with "crontab -e" command by using the "root" user.
* * * * * php -f /path/file.php
i tried it for php -q too. while i type this command on the shell the php file works. there is no problem with crontab rule too. the chmod of file.php is 777, user root group wheel..
but it cant work. i couldnt understand why it aint.
This is the current setup for the user (which is a normal setup)
ISP | switch |WAN |LAN 10.10.10.0/24 servers
switch is a cisco 2924XL
So on the servers there's dual ports one serves for WAN traffic and the other serves Local traffic.
Ive added in the sysctl net.link.ether.inet.log_arp_wrong_iface = 0 still no affect.
error...
Quote:
arp: IP_ADDRESS is on fxp0 but got reply from HW_ADDRESS on fxp1 arp: IP_ADDRESS is on fxp0 but got reply from HW_ADDRESS on fxp1 arp: IP_ADDRESS is on fxp0 but got reply from HW_ADDRESS on fxp1 arp: IP_ADDRESS is on fxp0 but got reply from HW_ADDRESS on fxp1 arp: IP_ADDRESS is on fxp0 but got reply from HW_ADDRESS on fxp1 arp: IP_ADDRESS is on fxp0 but got reply from HW_ADDRESS on fxp1
After FreeBSD 6.2 install completely with no errors, the server is rebooted, then it says "no boot loader" even though the boot loader was installed during the setup.
I have tried to reinstall several times by 3 different sources, but no lucks.
I need to host some video materials and I don't want to use something big like a VPS or dedi, shared will be enough for me. That's why I think quillhost.com service will suit my needs well as they support ffmpeg on their shared service.
I was wondering if there was anyone out there that could do an ffmpeg, flvtool2, mencoder installation on my CentOS 5.2 VPS for $10. I need it to be able to run phpmotion / youtube clone scripts...
We have a managed VPS, and have never needed on our own dedicated servers in teh past to have FFMPEG due to the line of data we host. So, I asked our provider to please install FFMPEG onto our server.
This is the response I have received:
FFMpeg requires PHP to be compiled as CGI (PHPsuexec) that is only officially supported by cPanel. So in order to install FFMpeg modules we have to resetup your VPS with cPanel.
Now our VPS is running Direct Admin on CentOS.
I am not trying to poke holes at our provider, just trying to find out if this is the truth, or if there is a work around that can accomplish this.
I do not want CPANEL on our account. We have two unix techs here at work, however unfortunately they are both off for two weeks as of middle of last week, so i'm caught with who to look for to gain a second opinion.
2- i have a music box and i have a large vistiros are my site in the workied good thats my site for media www.ms.ahba.in and i want convert to social media script
3- whats the limted for cpu
4- whats the limted for up and donload for space and bandwith
5- whats the limted for backup and the ((Automated Nightly Backups)) where are the backup file when well be?
6- are thee ssh include
7- and about vps if i want install scripr or update the apatchi for example did help me with out charge