ASSP Install Issues.
Mar 13, 2007
I followed the tutorial provided here for installing ASSP but am running into a small problem with exim failing on my vps. I am using ConfigServers csf and lfd and didn't know if there was more modifications needed for ASSP.
my exim panic log shows this:
2007-03-12 00:19:39 socket bind() to port 125 for address 127.0.0.1 failed:
Address already in use: daemon abandoned
I think that it may have to be my exim.conf or assp.cfg, but both read the same.
Exim.conf
local_interfaces = 127.0.0.1.125
Assp.cfg
smtpDestination:=127.0.0.1:125
View 11 Replies
ADVERTISEMENT
May 28, 2008
How to install ASSP on linux system without cpanel.
View 2 Replies
View Related
Mar 9, 2007
I tried to understand ASSP by searching in your documentation but nowhere it mentions that when we use a mail client programs. For example:
I install ASSP correctly. I start it. Actually, our spam database is empty. From my understanding, ASSP still let spams and non spams e-mails go through to build its database.
My question is:
Is there a way to know our first 400 or 1000 e-mails are spams in despite to categorize them properly?
How to categorize them on our server when we use Kmail or Outlook to download e-mails from the server?
If I create two folders: spam and nonspam in Outlook or Kmail and move the e-mails to the prosper folders, will it be synchronized with the server automatically?
View 6 Replies
View Related
Apr 9, 2009
I Want to use ASSP for a large number of server with different IP,
ASSP is use as SMTP proxy for the outbound traffic,
In Relaying > AcceptAllMail in put my network,
the question is : does the network will be scanned by assp, i have see that the network contribute to the whitelist?
View 4 Replies
View Related
Jul 16, 2008
My host seem to like interfering with spam setting on the server. They had spamassasin installed which works perfectly and i haven't been getting any spam when i enable the software.
All of a sudden all my subscription and a lot of email is rejected and now perfectly legit email is marked as spam.
I fail to understand why use software that reject normal mail.
View 3 Replies
View Related
Jul 16, 2007
I have been running ASSP for a long time on a Fedora/Postfix box without a single problem. Recently, however, I have acquired a CentOS/Plesk/Qmail machine and I am having a terrible time getting ASSP to play nicely with qmail.
I am attempting to follow the directions on the assp wiki regarding plesk. I changed qmail to listen on 125 instead of 25 by editing /etc/services. I then restarted everything but it then appeared that mail was going through without authentication. I was successfully able to send mail from an internal address to an external one without a problem, but I think I was able to do so without authenticating myself.
However, when attempting to send mail from an outside address to an internal one, I get a relay denied error message. Obviously ASSP isn't aware of the addresses I have set up on the system.
Also - I attempted to manually run the sh scripts downloaded from the wiki entry, but I kept getting the error message that I couldn't execute binary file, even though I gave the file execute permissions. I even tried adding #!/bin/sh to the top of the file, to no avail....
If anyone has successfully installed assp with Plesk and has authentication and the plesk automation scripts running like they should, please let me know how you did it.
Right now this machine is processing about 3000 emails a day, 90% of which are spam, so I really need to get ASSP installed and running here.
View 3 Replies
View Related
Sep 1, 2007
Anyone recommend using ASSP Deluxe for cpanel 11 on a shared server or even dedicated?
I couldn't find any reviews, except a couple poor ones on the clone asspx
View 1 Replies
View Related
Mar 25, 2009
I have a Windows 2003 server running Plesk 8.3, Mailenable with Horde IMP webmail client. I have installed Anti-Spam SMTP Proxy (ASSP) [url] on my server to counter SPAM.
I have configured it with the instructions found here - [url]This configuration works perfectly apart from one issue - whenever I try to send emails from my Horde IMP webmail interface, I get an error saying "unable to set sender to [emailaccount at domain]".
If I deactivate ASSP everything works fine.
I believe this is not an issue with ASSP since no one's complaining on ASSP forums. I posted this issue there and someone suggested it had something to do with how Horde IMP tries to send emails. I posted this to Horde's mailing list too but no one ever answered.
View 0 Replies
View Related
Jun 14, 2008
I am interested in ASSP as a anti-spam tool and have heard good things, but I have 1 question I can't seem to find an answer too.
With ASSP is there a way to screen image spam like you can with FuzzyOCR? With ASSP do you even need to scan images at all? Because it waits for the sending server to respond for authentication?
I was running MailScanner / SpamAssasin / FuzzyOCR combo with a couple of chron jobs (to sweep fake bounce email out of the mail que for example) with very effective results, but it took forever to tweak all three to reduce server load. MailScanner was breaking webmail randomly so I have it disabled currently so I get a lot more spam.
View 0 Replies
View Related
Mar 13, 2007
All of my forwarded spams to my spam box e-mail is not listed in errors/spam.
View 5 Replies
View Related
Jul 4, 2009
How can i completely uninstall ASSP from my windows 2008 server? i am using plesk with mailenable pro.
View 0 Replies
View Related
Jan 13, 2009
We have been more than 2 years with Liquidweb. Yes, great machine and datacenter. We were using spamassasin as bundled software on cpanel to fight with spammer, but it was not good enough.
1 year ago we decided to install ASSP Deluxe antispam on our dedicated server, bought from grscripts.com. Its powerful software against the spammer which succesfuly isolate them on a separate folder/email. And our clients happy working on emailing activity.
But in the early of 2009, liquidweb has terminated the software as it's not match with their TOS. Its a weird policy since we installed it 1 year ago.
Honestly, we want to keep you (liquidweb) as our valuable datacenter, but we need solution to keep running a business and stay alive on it. Otherwise we have no choice to migrate our dedicated server (consume a lot of time and energy).
View 0 Replies
View Related
Mar 12, 2008
Every week or so, my whitelist in ASSP is getting filled up with @*.de email addresses. Coincidentally, at that same time, I start receiving massive amounts of spam because those addresses are whitelisted.
Has anyone ever had this happen to them? The list of addresses is the same every time it happens, but it really worries me that somehow my whitelist is getting modified without my permission. The assp web interface is disabled (blocked at the firewall) because I update the configuration by just editing the files. SSH access is completely disabled, save for key authentication...So my thoughts are that somehow, an external address is able to modify my whitelist...somehow.
Does anyone have any thoughts or troubleshooting ideas for me?
View 14 Replies
View Related
Sep 10, 2008
I am looking for a VPS provider that can install ASSP instead
of SpamAssassin does anybody know of any?
View 0 Replies
View Related
Jul 21, 2007
I installed ASSP Deluxe for cPanel, but one missing feature/config I like, is only allow messages in English, and disregard all other langauges. No I am not reselling so English is fine. How would I change the ASSP config file to only allow English e-mails?
View 0 Replies
View Related
Jan 29, 2007
What is ASSP? ASSP is an Anti-Spam SMTP Proxy . The homepage can be found here. ASSP is a lightweight daemon that can filter mail based on various things such as SPF, RBLs, Bayesian word lists, as well as blocking email addresses from getting mail, or having mail filtered.
This tutorial will walk you through getting the admin interface for CPanel setup for ASSP. Currently, a paid user interface can be obtained here (note that I am in no way affiliated with, nor have I tried to use this UI, I am just offering the link to those that might find it useful)
Firstly, the setup:
You will need to activate Cpanel PRO (pro.cpanel.net/activate) for your server in order for this to fully work. This activation is currently free. Simply go to the previous mentioned URL and enter your IP address if you have not done so already.
Once you have activated CPanel PRO, go into whm->addon modules and check clamav connector, then click on "save". This will install clamav for you to use
Once you have done THIS, go to whm->service manager and UNcheck spamd (it is no longer necessary with ASSP), and again click on save/submit. Note that this IS optional, however the purpose of ASSP is to defeat spam before it GETS to SpamAssassin.
Once you have done THAT, go into whm -> tweak settings and uncheck SpamAssassin and BoxTrapper mail.
Secondly, the requirements:
ASSP needs certain perl modules established To install these, simply login (as root) to your server, and type the following
Code:
/scripts/perlinstaller --force Compress::Zlib
/scripts/perlinstaller --force Email::Valid
/scripts/perlinstaller --force File::ReadBackwards
/scripts/perlinstaller --force File::Scan::ClamAV
/scripts/perlinstaller --force Mail::SPF::Query
/scripts/realperlinstaller --force Mail::SRS
/scripts/realperlinstaller --force Tie::RDBM
/scripts/realperlinstaller Sys::Syslog
/scripts/perlinstaller --force Net::LDAP
/scripts/perlinstaller --force Time::HiRes
/scripts/perlinstaller --force Tie::DBI
Note that the --force is optional, however it will make sure you've got it installed. Do these one at a time as some of these have configurable options to them.
One more perl module is needed. Since the later versions of Net::DNS are known to cause issues with RBLs, SPFs and the like, it is advised to use 0.57 . This can be obtained by doing the following:
Code:
mkdir /usr/local/assp
cd /usr/local/assp
mkdir /usr/local/assp/tmp
cd /usr/local/assp/tmp
wget [url]
tar xzf Net-DNS-0.57.tar.gz
cd Net-DNS-0.57
perl Makefile.PL
make
make test
make install
Do NOT remove the /usr/local/assp/tmp directory as when you update cpanel, it will try to auto update Net::DNS again, so you will want this intact.
Now, let's get with the program here and install ASSP:
Code:
cd /usr/local/assp
wget [url]
unzip -d /usr/local/assp /usr/local/assp/ASSP_1.2.6-Install.zip
mv --target-directory=/usr/local/assp /usr/local/assp/ASSP/*
mv --target-directory=/usr/local/assp /usr/local/assp/ASSP/.DS_Store
rm -rf /usr/local/assp/__MACOSX
rm -rf /usr/local/assp/ASSP
rm -f ASSP_1.2.6-Install.zip
rm -f Win32-quickstart-guide.txt;rm -f freshclam.bat
cd /usr/local/assp
mkdir pb
cd pb
touch denysmtp.txt
touch exportedextreme.txt
touch pbdb.black.db
touch pbdb.rbl.db
touch pbdb.white.db
cd /usr/local/assp
mkdir /usr/local/assp/notspam
mkdir /usr/local/assp/spam
mkdir /usr/local/assp/errors
mkdir /usr/local/assp/errors/notspam
cd /usr/local/assp
wget [url]
chmod 755 start
wget [url]
chmod 755 stop
cd /etc/rc.d/init.d
wget [url]
chmod 755 assp
The core of ASSP is now installed. However, the development versions have updated functions to use for users. Of course, this is completely optional, but is recommended completely. This can be done by the following in SSH
Code:
cd /usr/local/assp/
mv assp.pl assp.pl_old
mv spamdb spamdb.old
mv rebuildspamdb.pl rebuildspamdb.pl.old
mv repair.pl repair.pl.old
mkdir Data
mkdir Data/Lists
wget [url]
wget [url]
000F4555.2/rebuildspamdb.pl
wget [url]
wget [url]
mv assp.css images
wget [url]
cd Data/Lists
wget [url]
chmod u+x /usr/local/assp/*.pl
Now, let's get it up and running, and configure it, shall we?
Code:
cd /usr/local/assp
/etc/init.d/assp start
You'll see ASSP sending out some messages and then doing nothing. This is ok, and it's the expected response. Now, we need to edit some stuff. Hit ctrl-c (cancel) to shut down ASSP
once it's stopped, you'll see the following file in the assp directory - assp.cfg . Edit that with whatever you want for an editor, something like:
Code:
nano assp.cfg
You want to change a few options immediately just to get it working
Look for the lines that are something like:
Code:
runAsGroup:=
runAsUser:=
and change them to be:
Code:
runAsGroup:=root
runAsUser:=root
Then look for the line that is
Code:
AsADaemon:=
and change it to
Code:
AsADaemon:=1
Now, let's change the password just so that we're secure:
look for the line that is
Code:
webAdminPassword:=nospam4me
and change that to
Code:
webAdminPassword:=insertrandompasswordhere
Now, let's tell ASSP to setup and accept mail for our domains. Look for the line something like
Code:
localDomains:=
and change that to be
Code:
localDomains:=file:/etc/localdomains
Almost there, just a couple more changes needed.
Look for the line that is something like
Code:
smtpDestination:=127.0.0.1:225
and change that to be
Code:
smtpDestination:=127.0.0.1:125
(or another port instead of 125, just REMEMBER the port!)
and one more change
change the line that looks like
Code:
listenPort:=125
to
Code:
listenPort:=25
Now save and exit the file. If you're using nano/pico, that would be ctrl-x , just make SURE to save the file before you exit!
Now, let's get ASSP fired up again
Code:
/etc/init.d/assp start
let's make sure you have assp starting on system boot:
Code:
chkconfig --add assp
Let's add a crontab to make sure that ASSP rebuilds the bayesian spam list
Quote:
crontab -e
Code:
10 4 * * * cd /usr/local/assp;/usr/local/assp/rebuildspamdb.pl
Occasionally, what I've seen is ASSP will get "hung" on certain things and just kill itself. This fix will work for this, and make sure your ASSP installation is running smoothly
Open up another file on the server, my example will be /bin/asspcheck. In this file, add the following contents
Code:
assplog=/usr/local/assp/check.log
DATE=`date "+%m-%d-%y [%k:%M]"`
pidof=/usr/local/assp/pid
thispid=`cat $pidof`
if [ ! -d /proc/$thispid ];then
rm -rf $pidof;
/etc/init.d/assp start
echo "$DATE - ASSP - restarted" >> $assplog
else
echo "$DATE - ASSP - ok" >> $assplog
fi
Now, chmod the file itself
Code:
chmod u+x /bin/asspcheck
Now, make sure it's called every 60 seconds. Add this to your root crontab
Quote:
crontab -e
Code:
* * * * * /bin/asspcheck
Now, let's go BACK into WHM and setup the variables needed to get exim to use ASSP
In exim configuration editor, click on "advanced editor"
Clear out EVERYTHING from all of the existing boxes. Keeping these with data can cause ASSP to not function as it should
When you've done that, add the following to the top box:
Code:
# assp
local_interfaces = 127.0.0.1.125
If you changed this variable to something else
Code:
smtpDestination:=127.0.0.1:125
put in the other port, NOT 125, so it would look like 127.0.0.1.whateverporthere
Click on Save
Exim will restart and you now have a working installation of assp
Now, let's go to it and work with it a bit, shall we?
go to [url], enter the user admin and the password you changed nospam4me to. This will get you logged in and you can tweak the settings as you feel necessary.
ASSP is a great and powerful proxy for any mail server, which blocks using RBLS, whitelists, etc. It is advisable to setup the email interface and let your customers know of this so that you can get them to help you in reporting and addressing spam.
Parts of this howto were taken from this page, however much of that data has been found to be outdated as far as downloads from CVS and the like go, and I've added quite a bit of useful information into it as well.
Go through the ASSP configuration VERY carefully, and ONLY change what you're sure of.
Start with the RBLs, increase the list to 5 and max hits to 2 as suggested.
If you notice problems with this or know how it might be better, hey, feel free to post in here and I'll keep it as updated as possible :)
View 14 Replies
View Related
Jul 19, 2015
Is it possible to install Plesk 12 to Debian Jessie with the autoinstall script?
View 7 Replies
View Related
Nov 14, 2008
problem with install suhosin and ...
how i can install Mod_security
View 7 Replies
View Related
Aug 8, 2008
What difference between yum install php or manually install php from scrach (build, make and install)?
I know manually install could configure lots of parameters and paths, like --iconv, --mbsting, etc. I don't know anything behind yum install php. If I want to install php everything in the following:
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-debug --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-sendmail=/usr/sbin/sendmail
View 6 Replies
View Related
Jul 22, 2008
to installing linux software and have been beating my head for a couple of days. I just learned that I can use something on my CENTOS 5 - which is the same as RHEL 5 - to install the rpm and all dependencies.
Numeric-24.2-1.i586.rpm is the rpm I want to install, if that matters.
How can I do install it AND any dependencies?
View 2 Replies
View Related
May 13, 2007
I am trying to install the kernel source.
I have downloaded kernel-2.6.20-1.2948.fc6.src.rpm
I am using fedora 6 64bit.
here are my current kernels:
kernel-headers-2.6.20-1.2948.fc6
kernel-devel-2.6.20-1.2944.fc6
yum-kernel-module-1.0.3-1.fc6
kernel-2.6.20-1.2944.fc6
kernel-devel-2.6.20-1.2948.fc6
kernel-2.6.20-1.2948.fc6
here is what I seen when I installed kernel-2.6.20-1.2948.fc6.src.rpm
rpm -ivh kernel-2.6.20-1.2948.fc6.src.rpm
1:kernel warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
warning: user brewbuilder does not exist - using root
########################################### [100%]
warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
then when I ran:
rpmbuild -bp --target=$(uname -m) /usr/src/redhat/SPECS/kernel-2.6.spec
I seen this error:
+ Arch=x86_64
+ make ARCH=x86_64 nonint_oldconfig
In file included from /usr/include/sys/socket.h:35,
from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/socket.h:310:24: error: asm/socket.h: No such file or directory
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.93770 (%prep)
I need to have this installed to get a app installed etc...
suggestions or ideas?
thanks
View 2 Replies
View Related
Oct 6, 2009
So i have a dedicated server and here are the specs:
AMD64 X2 7750+
8192 MB DDR2 RAM
500 GB 7.200 RPM
2000 GB Traffic p/m
CentOS 5.3
I want to install several VPS's on this server so i have one for shared users, one for reseller users and then the rest can be purchased. Unfortunately i have no idea how to install VPS's. Which is the best visualization software for VPS's? And how do i install and how to get whmcs to create them. Or are they already created?
I am also wondering about control panels and do vps's have to have their own separate control panel or do they all run of the main control panel.
Also what is the rule of thumb on how many vps's per server.
View 14 Replies
View Related
Oct 6, 2009
I'm willing to setup a new dedicated server that hosts only one website. before I just used Centos, it was free and worked perfect.
I dont want to spend any money for OS.
Which OS do you use?
View 14 Replies
View Related
Apr 1, 2009
Well I ordered a virtuzzo server and I am wondering on how do you install yum. Its a centos
View 7 Replies
View Related
Apr 10, 2009
I tried to : yum install gcc
Quote:
root@name [~]# yum install gcc
Traceback (most recent call last):
File "/usr/bin/yum", line 28, in ?
import yummain
File "/usr/share/yum-cli/yummain.py", line 30, in ?
from yum import _
ImportError: cannot import name _
command : rpm -q yum
Quote:
root@name [~]# rpm -q yum
yum-3.2.8-9.el5.centos.2.1
command : rpm -ap | grep yum
Quote:
root@name [~]# rpm -aq | grep yum
yum-3.2.8-9.el5.centos.2.1
yum-fastestmirror-1.1.10-9.el5.centos
yum-metadata-parser-1.1.2-2.el5
command : rpm -e yum-metadata-parser-1.0-8.fc6
Quote:
root@name [~]# rpm -e yum-metadata-parser-1.0-8.fc6
error: package yum-metadata-parser-1.0-8.fc6 is not installed
View 4 Replies
View Related
Jul 21, 2009
I've tried to work with yum. but if I "yum install .." enter, then i get this error :
PHP Code:
error: no dbpath has been set
error: cannot open Packages database in /%{_dbpath}
Traceback (most recent call last):
File "/usr/bin/yum", line 30, in ?
yummain.main(sys.argv[1:])
File "/usr/share/yum/yummain.py", line 163, in main
(log, errorlog, filelog, conf, cmds) = parseCmdArgs(args)
File "/usr/share/yum/yummain.py", line 75, in parseCmdArgs
conf=yumconf(configfile=yumconffile)
File "/usr/share/yum/config.py", line 155, in __init__
self.yumvar['releasever'] = self._getsysver()
File "/usr/share/yum/config.py", line 285, in _getsysver
idx = ts.dbMatch('provides', self.distroverpkg)
TypeError: rpmdb open failed
View 9 Replies
View Related
Jun 20, 2009
I'm playing around with a test server, install Xen on a Centos 5 box.
[url]
I've tried two methods to create a vm.
virt-install
and
virt-install -x "ip=xxx.xxx.70.212 gateway=xxx.xxx.70.211 subnet=255.255.255.248"
If I do virt-install, it asks me this:
(first screenshot).
I have no idea what to put it. I did try this:
Quote:
IPv4 address: xxx.xxx.70.212__ / 255.255.255.248_
Gateway: xxx.xxx.70.211___________________________
Name Server: _________________________________________
note: only here in my post am I actually putting "xxx" in the IP for privacy reasons only. The 70.212 is the main server IP that I ssh into.
See 2nd screenshot for error. Same thing with various *valid* mirrors I tried.
This is my ifcfg-eth0 info:
DEVICE=eth0
BOOTPROTO=static
IPADDR=xxx.xxx.70.212
NETMASK=255.255.255.248
ONBOOT=yes TYPE=Ethernet
View 5 Replies
View Related
Nov 4, 2009
I have bought Dell Optiplex 760 and i would like to in stall Virtual Private Server (VPS) on it.. can anybody please tell me step by step tutorial to install VPS in my computer and have my own webserver?
View 14 Replies
View Related
Jul 8, 2009
i want to install custom os in Xen.
what do i do?
i want install Mikrotik , Cenos and ... in it.
also how can i create image from it to use it again?
can i use this image for hypervm?
View 3 Replies
View Related
Jul 8, 2009
i intsalled clipshare script, and this is the server requirments:
# Mplayer + Mencoder
# Flv2tool
# Libogg + Libvorbis
# LAME MP3
how yo install it?
View 2 Replies
View Related
